172 lines
7 KiB
Plaintext
Executable file
172 lines
7 KiB
Plaintext
Executable file
<?XML Version="1.0">
|
|
<nidocument>
|
|
<nicomment>
|
|
<nifamily familyname="LabVIEW Simulation Module" displayname="LabVIEW Simulation Module">
|
|
</nifamily>
|
|
</nicomment>
|
|
<nierror code="-2355">
|
|
LabVIEW Simulation Module: The value of the Decimation parameter for the Collector function must be greater than or equal to 1.
|
|
</nierror>
|
|
<nierror code="-2354">
|
|
LabVIEW Simulation Module: The number of elements in the input array does not equal the number of columns in the gain matrix.
|
|
</nierror>
|
|
<nierror code="-2353">
|
|
LabVIEW Simulation Module: You cannot change the maximum delay while the simulation is running.
|
|
</nierror>
|
|
<nierror code="-2352">
|
|
LabVIEW Simulation Module: For fixed step-size ODE solvers, the delay must be less than or equal to the specified maximum delay.
|
|
</nierror>
|
|
<nierror code="-2351">
|
|
LabVIEW Simulation Module: The specified parameter is a vector. Enter a vector value.
|
|
</nierror>
|
|
<nierror code="-2350">
|
|
LabVIEW Simulation Module: The specified parameter is a scalar. Enter a scalar value.
|
|
</nierror>
|
|
<nierror code="-2349">
|
|
LabVIEW Simulation Module: The parameter name is not in the specified parameter list.
|
|
</nierror>
|
|
<nierror code="-2348">
|
|
LabVIEW Simulation Module: The given State Derivatives are incompatible with the specified subsystem.
|
|
</nierror>
|
|
<nierror code="-2347">
|
|
LabVIEW Simulation Module: The given Outputs are incompatible with the specified subsystem.
|
|
</nierror>
|
|
<nierror code="-2346">
|
|
LabVIEW Simulation Module: The given Inputs are incompatible with the specified subsystem.
|
|
</nierror>
|
|
<nierror code="-2345">
|
|
LabVIEW Simulation Module: The given States are incompatible with the specified subsystem.
|
|
</nierror>
|
|
<nierror code="-2344">
|
|
LabVIEW Simulation Module: The given Outputs are incompatible with the specified subsystem.
|
|
</nierror>
|
|
<nierror code="-2343">
|
|
LabVIEW Simulation Module: The given Inputs are incompatible with the specified subsystem.
|
|
</nierror>
|
|
<nierror code="-2342">
|
|
LabVIEW Simulation Module: The given States are incompatible with the specified subsystem.
|
|
</nierror>
|
|
<nierror code="-2341">
|
|
LabVIEW Simulation Module: The Simulation initial time cannot be greater than or equal to the final time.
|
|
</nierror>
|
|
<nierror code="-2340">
|
|
LabVIEW Simulation Module: The Linearizer detected an error while computing the Jacobian Matrix.
|
|
</nierror>
|
|
<nierror code="-2339">
|
|
LabVIEW Simulation Module: The ODE solver could not factor the Jacobian Matrix.
|
|
</nierror>
|
|
<nierror code="-2338">
|
|
LabVIEW Simulation Module: The ODE solver could not compute the Jacobian Matrix.
|
|
</nierror>
|
|
<nierror code="-2337">
|
|
LabVIEW Simulation Module: You can linearize only simulation subsystems.
|
|
</nierror>
|
|
<nierror code="-2336">
|
|
LabVIEW Simulation Module: The simulation diagram returned NaN to the ODE solver.
|
|
</nierror>
|
|
<nierror code="-2335">
|
|
LabVIEW Simulation Module: The simulation diagram returned an overflow to the ODE solver.
|
|
</nierror>
|
|
<nierror code="-2334">
|
|
LabVIEW Simulation Module: An overflow occurred in the ODE solver.
|
|
</nierror>
|
|
<nierror code="-2333">
|
|
LabVIEW Simulation Module: The time step must be between the minimum and maximum time steps.
|
|
</nierror>
|
|
<nierror code="-2332">
|
|
LabVIEW Simulation Module: The minimum time step must be less than or equal to the maximum time step.
|
|
</nierror>
|
|
<nierror code="-2331">
|
|
LabVIEW Simulation Module: The absolute tolerance and relative tolerance cannot both be zero.
|
|
</nierror>
|
|
<nierror code="-2330">
|
|
LabVIEW Simulation Module: The discrete time step is not an integer multiple of the time step.
|
|
</nierror>
|
|
<nierror code="-2329">
|
|
LabVIEW Simulation Module: The simulation time step cannot be zero.
|
|
</nierror>
|
|
<nierror code="-2328">
|
|
LabVIEW Simulation Module: Invalid use of the Linearize Subsystem dialog box. The Linearize Subsystem dialog box must be used only on subsystem VIs.
|
|
</nierror>
|
|
<nierror code="-2327">
|
|
LabVIEW Simulation Module: You can use the Linearize Subsystem dialog box only if you have created a VI under My Computer in the Project Explorer.
|
|
</nierror>
|
|
<nierror code="-2325">
|
|
LabVIEW Simulation Module: The ODE solver Newton Iteration did not converge at the minimum time step.
|
|
</nierror>
|
|
<nierror code="-2324">
|
|
LabVIEW Simulation Module: The ODE solver cannot meet the error tolerance using the minimum time step.
|
|
</nierror>
|
|
<nierror code="-2323">
|
|
LabVIEW Simulation Module: The simulation time step is negative or zero.
|
|
</nierror>
|
|
<nierror code="-2322">
|
|
LabVIEW Simulation Module: The Execution Mode is not consistent with the specified discrete integration method.
|
|
</nierror>
|
|
<nierror code="-2321">
|
|
LabVIEW Simulation Module: The sample rate divisor is negative or zero.
|
|
</nierror>
|
|
<nierror code="-2320">
|
|
LabVIEW Simulation Module: This intermediate solver evaluation should not have been executed.
|
|
</nierror>
|
|
<nierror code="-2319">
|
|
LabVIEW Simulation Module: The dimensions of the arrays for the Lookup Table are inconsistent.
|
|
</nierror>
|
|
<nierror code="-2318">
|
|
LabVIEW Simulation Module: The dimensions of the parameter vectors of this function do not match.
|
|
</nierror>
|
|
<nierror code="-2317">
|
|
LabVIEW Simulation Module: The Execution Mode is not consistent with the specified discrete integration method.
|
|
</nierror>
|
|
<nierror code="-2316">
|
|
LabVIEW Simulation Module: The order of the numerator must be greater than the order of the denominator.
|
|
</nierror>
|
|
<nierror code="-2315">
|
|
LabVIEW Simulation Module: You must match complex entries in the Zero-Pole-Gain function with a complex conjugate.
|
|
</nierror>
|
|
<nierror code="-2314">
|
|
LabVIEW Simulation Module: The order of the numerator and the order of the denominator are inconsistent.
|
|
</nierror>
|
|
<nierror code="-2313">
|
|
LabVIEW Simulation Module: The size of the initial condition vector is incorrect for the MIMO system.
|
|
</nierror>
|
|
<nierror code="-2312">
|
|
LabVIEW Simulation Module: The size of the input vector is incorrect for the MIMO system.
|
|
</nierror>
|
|
<nierror code="-2311">
|
|
LabVIEW Simulation Module: The system model order has changed from the previous iteration of the Simulation Loop.
|
|
</nierror>
|
|
<nierror code="-2310">
|
|
LabVIEW Simulation Module: Ill-conditioned MIMO system.
|
|
</nierror>
|
|
<nierror code="-2309">
|
|
LabVIEW Simulation Module: The period is negative or zero.
|
|
</nierror>
|
|
<nierror code="-2308">
|
|
LabVIEW Simulation Module: The duty cycle is out of range.
|
|
</nierror>
|
|
<nierror code="-2307">
|
|
LabVIEW Simulation Module: Evaluating a single-step solver on a minor substep.
|
|
</nierror>
|
|
<nierror code="-2306">
|
|
LabVIEW Simulation Module: The frequency is negative or zero.
|
|
</nierror>
|
|
<nierror code="-2305">
|
|
LabVIEW Simulation Module: The target time is less than or equal to the simulation initial time.
|
|
</nierror>
|
|
<nierror code="-2304">
|
|
LabVIEW Simulation Module: The upper limit is less than the lower limit.
|
|
</nierror>
|
|
<nierror code="-2303">
|
|
LabVIEW Simulation Module: The switch on point is less than the switch off point.
|
|
</nierror>
|
|
<nierror code="-2302">
|
|
LabVIEW Simulation Module: The quantization interval is less than or equal to zero.
|
|
</nierror>
|
|
<nierror code="-2301">
|
|
LabVIEW Simulation Module: Failed to translate expression.
|
|
</nierror>
|
|
<nierror code="-2300">
|
|
LabVIEW Simulation Module: Invalid SimX node reference.
|
|
</nierror>
|
|
</nidocument> |