*built new kernel

*new "get_available_disks" feature
*some backports in 0.2.1
This commit is contained in:
age 2005-10-21 09:28:54 +00:00
parent d88b3c2796
commit 782810135e
6 changed files with 130 additions and 125 deletions

View file

@ -1 +1 @@
../init.d/cb-hints.sh
../init.d/cb-finish-boot

View file

@ -120,7 +120,7 @@ function create_config()
log_msg "Copying configuration defaults ..."
cp -a "$CONFIG_DEFAULTS_DIR/." "$CONFIG_DIR"
log_msg "Copying temporary cerificate file to config filesystem ..."
log_msg "Copying temporary certificate file to config filesystem ..."
# beware: the temp file should always be there - even after reboot - see "mount_config"
cp -p "$CERT_TEMP" "$CERT_FILE"
@ -233,6 +233,16 @@ function find_harddisk()
echo -n "$dev"
}
function get_available_disks()
# looks which allowed disks are at the moment connected with the cbox
{
local dev=$(
for a in $SCAN_DEVICES
do grep -q " `basename $a`$" /proc/partitions && echo "$a"
done )
echo -n "$dev"
}
function mount_config()
{
@ -257,9 +267,9 @@ function mount_config()
function mount_crypto()
{
is_crypto_mounted && echo "Das Crypto-Dateisystem ist bereits aktiv!" && return
is_crypto_mounted && echo "The cryptofilesystem is already active!" && return
local device=`find_harddisk`
[ -z "$device" ] && error_msg 4 'no valid harddisk found!' && return 1
[ -z "$device" ] && error_msg 4 'No valid harddisk found!' && return 1
# passphrase is read from stdin
log_msg "Mounting crypto partition ..."
$CRYPTSETUP -h "$(config_get_value hash)" -c "$(config_get_value cipher)" create "`basename $CRYPTMAPPER_DEV`" "${device}2"
@ -301,12 +311,12 @@ function init_cryptobox_part1()
# this is only the first part of initialisation that takes no time - good for a smooth web interface
{
local device=$(find_harddisk)
[ -z "$device" ] && log_msg 'no valid harddisk found!' && return 1
[ -z "$device" ] && log_msg 'No valid harddisk found!' && return 1
(
log_msg "Initializing crypto partition on $device ..."
umount_crypto || true
mount | grep -q " $CONFIG_DIR " && umount "$CONFIG_DIR" || true
initial_checks "$device" || return 1
initial_checks "$device" || { log_msg "initial checks failed" && return 1}
create_partitions "$device"
create_config "$device"
) >>"$LOG_FILE" 2>&1
@ -437,6 +447,9 @@ case "$ACTION" in
# wait for 5 seconds to finish present http requests
echo -n "sleep 5; ifconfig $NET_IFACE `config_get_value ip`" | at now
;;
get_available_disks )
get_available_disks
;;
get_current_ip )
get_current_ip
;;
@ -487,6 +500,7 @@ case "$ACTION" in
echo " is_config_mounted - check, if configuration partition is mounted"
echo " is_init_running - check, if initialization is ongoing"
echo " is_harddisk_available - check, if there is a usable harddisk"
echo " get_available_disks - shows all connected and allowed disks"
echo " get_current_ip - get the current IP of the network interface"
echo " update_ip_address - update the network interface after reconfiguration"
echo " set_config NAME VALUE - change a configuration setting"

View file

@ -161,6 +161,11 @@ sub is_harddisk_available
return (system("$CB_SCRIPT","is_harddisk_available") == 0);
}
sub get_available_disks
# TODO: this is useful for diskselection buttons
{
return `$CB_SCRIPT get_available_disks`;
}
sub get_current_ip
# the IP of eth0 - not the configured value of the box (only for validation)

View file

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.12.6
# Mon Oct 17 13:43:42 2005
# Fri Oct 21 00:03:17 2005
#
CONFIG_X86=y
CONFIG_MMU=y
@ -357,117 +357,86 @@ CONFIG_IDEDMA_AUTO=y
#
# SCSI device support
#
CONFIG_SCSI=m
# CONFIG_SCSI_PROC_FS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SG=y
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
#
# SCSI low-level drivers
#
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_7000FASST=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AHA152X=m
CONFIG_SCSI_AHA1542=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_BUILD_FIRMWARE is not set
# CONFIG_AIC79XX_ENABLE_RD_STRM is not set
CONFIG_AIC79XX_DEBUG_ENABLE=y
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_DPT_I2O=m
CONFIG_SCSI_IN2000=m
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_MEGARAID_NEWGEN is not set
CONFIG_MEGARAID_LEGACY=m
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SATA is not set
CONFIG_SCSI_BUSLOGIC=m
# CONFIG_SCSI_OMIT_FLASHPOINT is not set
CONFIG_SCSI_DMX3191D=m
CONFIG_SCSI_DTC3280=m
CONFIG_SCSI_EATA=m
# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_GDTH=m
CONFIG_SCSI_GENERIC_NCR5380=m
CONFIG_SCSI_GENERIC_NCR5380_MMIO=m
# CONFIG_SCSI_GENERIC_NCR53C400 is not set
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
CONFIG_SCSI_NCR53C406A=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
CONFIG_SCSI_IPR=m
# CONFIG_SCSI_IPR_TRACE is not set
# CONFIG_SCSI_IPR_DUMP is not set
CONFIG_SCSI_PAS16=m
CONFIG_SCSI_PSI240I=m
CONFIG_SCSI_QLOGIC_FAS=m
CONFIG_SCSI_QLOGIC_FC=m
# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set
CONFIG_SCSI_QLOGIC_1280=m
# CONFIG_SCSI_QLOGIC_1280_1040 is not set
CONFIG_SCSI_QLA2XXX=m
CONFIG_SCSI_QLA21XX=m
CONFIG_SCSI_QLA22XX=m
CONFIG_SCSI_QLA2300=m
CONFIG_SCSI_QLA2322=m
CONFIG_SCSI_QLA6312=m
CONFIG_SCSI_LPFC=m
CONFIG_SCSI_SYM53C416=m
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_DC390T=m
CONFIG_SCSI_T128=m
CONFIG_SCSI_U14_34F=m
# CONFIG_SCSI_U14_34F_TAGGED_QUEUE is not set
# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set
CONFIG_SCSI_U14_34F_MAX_TAGS=8
CONFIG_SCSI_ULTRASTOR=m
CONFIG_SCSI_NSP32=m
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
@ -501,7 +470,7 @@ CONFIG_IEEE1394=y
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_IEEE1394_OUI_DB is not set
CONFIG_IEEE1394_OUI_DB=y
# CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set
#
@ -511,17 +480,17 @@ CONFIG_IEEE1394=y
#
# Texas Instruments PCILynx requires I2C
#
CONFIG_IEEE1394_OHCI1394=m
CONFIG_IEEE1394_OHCI1394=y
#
# Protocol Drivers
#
# CONFIG_IEEE1394_VIDEO1394 is not set
CONFIG_IEEE1394_SBP2=m
CONFIG_IEEE1394_SBP2=y
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
# CONFIG_IEEE1394_ETH1394 is not set
# CONFIG_IEEE1394_DV1394 is not set
# CONFIG_IEEE1394_RAWIO is not set
CONFIG_IEEE1394_RAWIO=y
# CONFIG_IEEE1394_CMP is not set
#
@ -953,7 +922,7 @@ CONFIG_DUMMY_CONSOLE=y
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=m
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
@ -968,13 +937,13 @@ CONFIG_USB_DEVICEFS=y
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
#
@ -987,7 +956,7 @@ CONFIG_USB_UHCI_HCD=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
CONFIG_USB_STORAGE_FREECOM=y
@ -1182,18 +1151,32 @@ CONFIG_CRAMFS=y
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-15"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
@ -1213,21 +1196,21 @@ CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=y
CONFIG_NLS_ISO8859_4=y
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=y
CONFIG_NLS_ISO8859_14=y
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
# CONFIG_NLS_UTF8 is not set
#
# Profiling support

View file

@ -84,7 +84,7 @@ function configure_cb()
if [ ! -e "$IMAGE_DIR" ]; then
echo -e "Directory \"$IMAGE_DIR\" not found!"
echo -e "Did you run \"$0 dfsbuild\"?"
exit
exit 1
fi
echo "Copying files to the box ..."
@ -102,7 +102,7 @@ function configure_cb()
# 'source' implicitly imports all current settings
# indent these lines to improve the output
( source "$file" ) 2>&1 | sed 's/^/\t/'
done
done
}
@ -110,9 +110,12 @@ function blanknburn_cdrw()
{
cdrecord -v dev=$CDWRITER blank=fast
if [ -e "$IMAGEZ_FILE" ]; then
$IMAGE_FILE=$IMAGEZ_FILE
cdrecord -v dev=$CDWRITER $IMAGEZ_FILE
elif [ -e "IMAGE_FILE" ]; then
cdrecord -v dev=$CDWRITER $IMAGE_FILE
else
echo "can't find CryptoBox image to burn" && exit 1
fi
cdrecord -v dev=$CDWRITER $IMAGE_FILE
}
################ do it! ######################
@ -121,7 +124,7 @@ function blanknburn_cdrw()
# initialize local directories (easier for users)
for a in $LOCALCONF_DIR $CUSTOM_CONFIGURE_DIR
do [ ! -e "$a" ] && mkdir "$a" && chown --reference=. "$a"
done
done
# check for uid=0 (necessary for all operations)
[ "$(id -u)" -ne 0 ] && echo "this script ($0) has to be called as root" >&2 && exit 1