moving around

This commit is contained in:
lars 2006-05-12 16:56:15 +00:00
parent e73d969053
commit 4142e11913
255 changed files with 0 additions and 3474 deletions

View File

@ -1,590 +0,0 @@
#!/bin/sh
#
# Copyright (c) 02005 sense.lab <senselab@systemausfall.org>
#
# License: This script is distributed under the terms of version 2
# of the GNU GPL. See the LICENSE file included with the package.
#
# $Id$
#
# this script does EVERYTHING
# all other scripts are only frontends :)
#
# called by:
# - some rc-scripts
# - the web frontend cgi
#
# TODO: check permissions and owners of config files, directories and scripts before
# running cbox-root-actions.sh
set -eu
# define reasonable defaults
USE_STUNNEL=0
EXEC_FIREWALL_RULES=0
SKIP_NETWORK_CONFIG=1
CONF_FILE=/etc/cryptobox/cryptobox.conf
# read the default setting file, if it exists
[ -e /etc/default/cryptobox ] && . /etc/default/cryptobox
# parse config file
. "$CONF_FILE"
# check for writable log file
[ -w "$LOG_FILE" ] || LOG_FILE=/tmp/$(basename "$LOG_FILE")
## configuration
CERT_TEMP=/tmp/stunnel.pem
######## stuff ##########
ALL_PARTITIONS=$(cat /proc/partitions | sed '1,2d; s/ */ /g; s/^ *//' | cut -d " " -f 4)
#########################
function log_msg()
{
# the log file is not writable during boot - try before writing ...
[ -w "$LOG_FILE" ] || return 0
echo >>"$LOG_FILE"
echo "##### `date` #####" >>"$LOG_FILE"
echo "$1" >>"$LOG_FILE"
}
function error_msg()
# parameters: ExitCode ErrorMessage
{
echo "[`date`] - $2" | tee -a "$LOG_FILE" >&2
# print the execution stack - not usable with busybox
# caller | sed 's/^/\t/' >&2
exit "$1"
}
function config_set_value()
# parameters: SettingName [SettingValue]
# read from stdin if SettingValue is not defined
{
[ "$USE_SEPERATE_CONFIG_PARTITION" = "1" ] && sudo "$ROOT_PERM_SCRIPT" remount_config rw
if [ $# -gt 1 ]
then echo -n "$2" > "$CONFIG_DIR/$1"
else cat - >"$CONFIG_DIR/$1"
fi
[ "$USE_SEPERATE_CONFIG_PARTITION" = "1" ] && sudo "$ROOT_PERM_SCRIPT" remount_config ro
}
function config_get_value()
# parameters: SettingName
{
# use mounted config, if it exists - otherwise use defaults
local conf_dir
if is_config_active
then conf_dir=$CONFIG_DIR
else conf_dir=$CONFIG_DEFAULTS_DIR
fi
[ -z "$1" ] && error_msg 1 "empty setting name"
# check for existence - maybe use default values (for old releases without this setting)
if [ ! -e "$conf_dir/$1" ]
then case "$1" in
# you may place default values for older versions here
# for compatibility
* )
error_msg 2 "unknown configuration value ($1)"
# empty output
;;
esac
else echo -n $(cat "$conf_dir/$1")
# this removes the trailing line break
fi
# always return without error
true
}
function create_config()
# Parameter: device
{
local device=$1
unload_config
# create the new configuration filesystem if it is not static
if [ "$USE_SEPERATE_CONFIG_PARTITION" != "1" ]
then log_msg "Using static configuration ..."
else log_msg "Creating config filesystem ..."
sudo "$ROOT_PERM_SCRIPT" create_config "$device"
log_msg "Mounting config partition ..."
sudo "$ROOT_PERM_SCRIPT" mount_config "$device"
sudo "$ROOT_PERM_SCRIPT" remount_config rw
fi
log_msg "Copying configuration defaults ..."
cp -a "$CONFIG_DEFAULTS_DIR/." "$CONFIG_DIR"
log_msg "Copying temporary certificate file to config filesystem ..."
# beware: the temp file should always be there - even after reboot - see "load_config"
[ "$USE_STUNNEL" = 1 ] && cp -p "$CERT_TEMP" "$CERT_FILE"
log_msg "Setting inital values ..."
# beware: config_set_value remounts the config partition read-only
config_set_value "ip" "$(get_current_ip)"
# create database of readable names
config_set_value "names.db" ""
# create a marker to recognize a cryptobox partition
# this should be the last step, to prevent a half-initialized state
config_set_value "$CONFIG_MARKER" "$(date -I)"
}
function get_current_ip()
# not necessarily the same as configured (necessary for validation)
{
# filter the output of ifconfig and remove trailing line break
echo -n $("$IFCONFIG" "$NET_IFACE" | grep "inet" | cut -d ":" -f2 | cut -d " " -f1)
}
function list_partitions_of_type()
# parameter: { config | crypto | plaindata | unused }
{
local config=
local crypto=
local plaindata=
local unused=
for a in $ALL_PARTITIONS
do if sudo "$ROOT_PERM_SCRIPT" is_crypto_partition "/dev/$a"
then crypto="$crypto /dev/$a"
elif sudo "$ROOT_PERM_SCRIPT" is_config_partition "/dev/$a"
then config="$config /dev/$a"
elif sudo "$ROOT_PERM_SCRIPT" is_plaindata_partition "/dev/$a"
then plaindata="$plaindata /dev/$a"
else unused="$unused /dev/$a"
fi
done
case "$1" in
config | crypto | plaindata | unused )
# dirty hack, but it works
eval "echo \$$1"
;;
* )
errot_msg "wrong parameter ($1) for list_partition_types in $(basename $0)"
;;
esac | tr " " "\n" | grep -v '^$'
}
function get_crypto_uuid()
# Parameter: DEVICE
{
sudo "$ROOT_PERM_SCRIPT" get_device_name "$1"
}
function get_crypto_name()
# Parameter: DEVICE
# return the readable name of the crypto container, it it is already defined
# if undefined - return the uuid
{
local uuid=$(get_crypto_uuid "$1")
local dbname=$(config_get_value "names.db" | grep "^$uuid:" | cut -d ":" -f 2-)
if [ -z "$dbname" ]
then echo -n "$uuid"
else echo -n "$dbname"
fi
}
function set_crypto_name()
# TODO: the implementation is quite ugly, but it works (tm)
# Parameter: DEVICE NAME
{
local uuid=$(get_crypto_uuid "$1")
# remove the old setting for this device and every possible entry with the same name
(config_get_value 'names.db' | sed "/^$uuid:/d; /^[^:]*:$2$/d"; echo "$uuid:$2") | config_set_value 'names.db'
}
function does_crypto_name_exist()
# Parameter: NAME
{
config_get_value 'names.db' | grep -q "^[^:]*:$1$"
}
function create_crypto()
# Parameter: DEVICE NAME KEYFILE
# keyfile is necessary, to allow background execution via 'at'
# TODO: check if the keyfile is still necessary for sudo -b
{
local device=$1
local name=$2
local keyfile=$3
# otherwise the web interface will hang
# passphrase may be passed via command line
local key=$(<"$keyfile")
# remove the passphrase-file as soon as possible
dd if=/dev/zero of="$keyfile" bs=512 count=1 2>/dev/null
rm "$keyfile"
log_msg "Creating crypto partition with the cipher $DEFAULT_CIPHER on $device"
echo "$key" | sudo "$ROOT_PERM_SCRIPT" create_crypto "$device"
set_crypto_name "$device" "$name"
}
function is_config_active()
{
test -f "$CONFIG_DIR/$CONFIG_MARKER"
}
function is_crypto_mounted()
# Parameter: DEVICE
{
local name=$(get_crypto_uuid "$1")
[ -n "$name" ] && mountpoint -q "$MNT_PARENT/$name"
}
function is_init_running()
{
check_at_command_queue " init"
}
# check if a specified command is in an at-queue
# Parameter: a regular expression of the commandline
# Return: the command is part of an at-queue (0) or not (1)
function check_at_command_queue()
{
# 1) get the available job numbers
# 2) remove empty lines (especially the last one)
# 3) check every associated command for the regexp
at -l | cut -f 1 | while read jobnum
do at -c $jobnum | sed '/^$/d' | tail -1
done | grep -q "$1"
}
function find_harddisk()
# look for the harddisk to be partitioned
{
local device=$(get_available_disks | head -1)
if [ -z "$device" ] ; then
log_msg "no valid harddisk for initialisation found!"
cat /proc/partitions >>"$LOG_FILE"
# do not return with an error, to avoid a failing of the script ('break on error')
# the caller of this function should handle an empty return string
fi
echo -n "$device"
}
function get_available_disks()
# looks which allowed disks are at the moment connected with the cbox
{
for scan in $SCAN_DEVICES
do for avail in $ALL_PARTITIONS
do [ "$scan" = "$avail" ] && echo "/dev/$avail"
done
done
}
function load_config()
{
unload_config
local status=0
# look for a configuration partition
[ "$USE_SEPERATE_CONFIG_PARTITION" = "1" ] && \
list_partitions_of_type config | while read part && [ "$status" = 0 ]
do log_msg "Trying to load configuration from /dev/$part ..."
if sudo "$ROOT_PERM_SCRIPT" is_config_partition "/dev/$part"
then log_msg "configuraton found on $part"
sudo "$ROOT_PERM_SCRIPT" mount_config "/dev/$part"
status=1
fi
done
if is_config_active
then # copy certificate to /tmp in case of re-initialization
# /tmp should be writable, so tmpfs has to be mounted before (/etc/rcS.d)
[ "$USE_STUNNEL" = 1 ] && cp "$CERT_FILE" "$CERT_TEMP"
else log_msg "failed to locate config partition"
return 1
fi
true
}
function unload_config()
{
is_config_active || return
# only try to unmount, if it is not static (the config of a live-cd is always dynamic)
if [ "$USE_SEPERATE_CONFIG_PARTITION" = "1" ]
then sudo "$ROOT_PERM_SCRIPT" umount_config
else true
fi
}
function mount_crypto()
# Parameter: DEVICE
{
local device=$1
[ -z "$device" ] && error_msg 4 'No valid harddisk found!' && return 1
is_crypto_mounted "$device" && echo "The crypto filesystem is already active!" && return
# passphrase is read from stdin
log_msg "Mounting a crypto partition from $device"
sudo "$ROOT_PERM_SCRIPT" mount "$device" >>"$LOG_FILE" 2>&1
}
function umount_crypto()
# Parameter: DEVICE
{
local device=$1
local uuid=$(get_crypto_uuid $device)
sudo "$ROOT_PERM_SCRIPT" umount "$uuid"
}
function box_purge()
# removing just the first bytes from the harddisk should be enough
# every harddisk will be overriden!
{
# TODO: not ALL harddisks, please!
get_available_disks | while read a
do log_msg "Purging $a ..."
sudo "$ROOT_PERM_SCRIPT" trash_device "$a"
done
}
function init_cryptobox()
# this is only the first part of initialisation that takes no time - good for a smooth web interface
{
local device=$(find_harddisk)
[ -z "$device" ] && log_msg 'No valid harddisk found!' && return 1
turn_off_all_crypto
unload_config || true
log_msg "Partitioning the device ($device) ..."
sudo "$ROOT_PERM_SCRIPT" partition_disk "$device" "0,1,L \n,,L\n"
log_msg "Initializing config partition on ${device}1 ..."
# TODO: this should not be hard-coded
create_config "${device}1"
}
function turn_off_all_crypto()
{
list_crypto_containers | while read a
do is_crypto_mounted "$a" && umount_crypto "$a"
done
}
### main ###
# set PATH because thttpd removes /sbin and /usr/sbin for cgis
export PATH=/usr/sbin:/usr/bin:/sbin:/bin
ACTION=help
[ $# -gt 0 ] && ACTION=$1 && shift
case "$ACTION" in
config-up )
if load_config
then echo "Cryptobox configuration successfully loaded"
else error_msg 0 "Could not find a configuration partition!"
fi
;;
config-down )
unload_config || error_msg 4 "Could not unmount configuration partition"
;;
network-up )
if [ "$SKIP_NETWORK_CONFIG" != 1 ]
then conf_ip=$(config_get_value "ip")
log_msg "Configuring $NET_IFACE for $conf_ip ..."
echo "Configuring network interface for $NET_IFACE: $conf_ip"
"$IFCONFIG" "$NET_IFACE" "$conf_ip"
fi
if [ "$EXEC_FIREWALL_RULES" = 1 ]
then log_msg "Starting the firewall ..."
"$FIREWALL_SCRIPT" start
fi
if [ "$USE_STUNNEL" = 1 ]
then # start stunnel
if [ -f "$CERT_FILE" ]
then USE_CERT=$CERT_FILE
else USE_CERT=$CERT_TEMP
$MAKE_CERT_SCRIPT "$CERT_TEMP" >>"$LOG_FILE" 2>&1
# TODO: this could be dangerous - right?
# this is necessary, to allow www-data to copy the certificate
chown "$WEB_USER" "$CERT_TEMP"
fi
log_msg "Starting stunnel ..."
stunnel -p "$USE_CERT" -r localhost:80 -d 443 \
|| echo "$USE_CERT not found - not starting stunnel"
fi
;;
network-down )
if [ "$EXEC_FIREWALL_RULES" = 1 ]
then log_msg "Stopping the firewall ..."
"$FIREWALL_SCRIPT" stop
fi
if [ "$USE_STUNNEL" = 1 ]
then log_msg "Stopping stunnel ..."
# TODO: what about a pid?
killall stunnel 2>/dev/null || true
fi
if [ "$SKIP_NETWORK_CONFIG" != 1 ]
then log_msg "Shutting the network interface down ..."
"$IFCONFIG" "$NET_IFACE" down
fi
;;
services-up )
# the mount point has to be writeable
# this action is called as root - so we are allowed to umount
# TODO: do this only for ro-filesystem
# TODO: this way of mounting is evil
if mountpoint -q "$MNT_PARENT"
then true
else mount -t tmpfs tmpfs "$MNT_PARENT"
fi
true
;;
services-down )
# this action is called as root - so we are allowed to umount
mountpoint -q "$MNT_PARENT" && umount "$MNT_PARENT"
# TODO: we should not depend on samba and thttpd
# /etc/init.d/samba stop || true
# /etc/init.d/thttpd stop || true
true
;;
crypto-up )
[ $# -ne 1 ] && error_msg "invalid number of parameters for 'crypto-up'"
mount_crypto "$1"
;;
crypto-down )
[ $# -ne 1 ] && error_msg "invalid number of parameters for 'crypto-down'"
umount_crypto "$1"
;;
init )
init_cryptobox </dev/null >>"$LOG_FILE" 2>&1
;;
crypto-create )
# Parameter: DEVICE NAME
[ $# -ne 2 ] && error_msg "invalid number of parameters for 'crypto-create'"
# do it in the background to provide a smoother web interface
# messages and errors get written to $LOG_FILE
keyfile=/tmp/$(basename "$0")-passphrase-$(basename "$1")
# read the password
cat - >"$keyfile"
# execute it in the background
echo "'$0' crypto-create-bg '$1' '$2' '$keyfile' </dev/null >>'$LOG_FILE' 2>&1" | at now
;;
crypto-create-bg )
create_crypto "$@"
;;
crypto-list )
list_partitions_of_type crypto
;;
crypto-list-unused )
list_partitions_of_type unused
;;
crypto-name )
# Parameter: DEVICE
get_crypto_name "$1"
;;
is_crypto_mounted )
[ $# -ne 1 ] && error_msg 10 "invalid number of parameters for 'is_crypto_mounted'"
is_crypto_mounted "$1"
;;
is_config_mounted )
is_config_active
;;
is_init_running )
is_init_running
;;
is_harddisk_available )
[ -z "$(find_harddisk)" ] && exit 1
exit 0
;;
update_ip_address )
# reconfigure the network interface to a new IP address
# wait for 5 seconds to finish present http requests
if [ "$SKIP_NETWORK_CONFIG" != 1 ]
then echo -n "sleep 5; sudo $ROOT_PERM_SCRIPT update_network" | at now
fi
;;
get_available_disks )
get_available_disks
;;
get_current_ip )
get_current_ip
;;
set_config )
[ $# -ne 2 ] && error_msg 7 "'set_config' requires two parameters"
config_set_value "$1" "$2"
;;
get_config )
[ $# -ne 1 ] && error_msg 6 "'get_config' requires exactly one parameter"
config_get_value "$1"
;;
diskinfo )
get_available_disks | while read a
do sudo "$ROOT_PERM_SCRIPT" diskinfo "$a"
done
;;
box-purge )
log_msg "Cleaning the CryptoBox ..."
turn_off_all_crypto
"$0" config-down
box_purge >>"$LOG_FILE" 2>&1
;;
poweroff )
log_msg "Turning off the CryptoBox ..."
turn_off_all_crypto
echo "poweroff" | at now
;;
reboot )
log_msg "Rebooting the CryptoBox ..."
turn_off_all_crypto
echo "reboot" | at now
;;
* )
echo "Syntax: `basename $0` ACTION [PARAMS]"
echo " config-up - scan for configuration partition and mount it"
echo " config-down - unmount configuration partition"
echo " network-up - enable network interface"
echo " network-down - disable network interface"
echo " services-up - run some cryptobox specific daemons"
echo " services-down - stop some cryptobox specific daemons"
echo " crypto-up - mount crypto partition"
echo " crypto-down - unmount crypto partition"
echo " box-init - initialize cryptobox (ALL data is LOST)"
echo " box-init-fg - the first part of initialization"
echo " box-init-bg - the last part of initialization (background)"
echo " is_crypto_mounted - check, if crypto partition is mounted"
echo " is_config_mounted - check, if configuration partition is mounted"
echo " is_init_running - check, if initialization is ongoing"
echo " is_harddisk_available - check, if there is a usable harddisk"
echo " get_available_disks - shows all connected and allowed disks"
echo " get_current_ip - get the current IP of the network interface"
echo " update_ip_address - update the network interface after reconfiguration"
echo " set_config NAME VALUE - change a configuration setting"
echo " get_config NAME - retrieve a configuration setting"
echo " diskinfo - show the partition table of the harddisk"
echo " box-purge - destroy partitiontable of all harddisks (delete everything)"
echo " poweroff - shutdown the cryptobox"
echo " reboot - reboot the cryptobox"
echo
;;
esac
exit 0

View File

@ -1,330 +0,0 @@
#!/bin/sh
#
# Copyright (c) 02005 sense.lab <senselab@systemausfall.org>
#
# License: This script is distributed under the terms of version 2
# of the GNU GPL. See the LICENSE file included with the package.
#
# $Id$
#
# this script is responsible for all dangerous actions, that require root privileges
# every action should be checked at least TWICE a day for open holes :)
# usually will get call via sudo
#
# called by:
# - cbox-manage.sh
#
set -eu
[ "$(id -u)" -ne 0 ] && echo "$(basename $0) - only root may call this script" >&2 && exit 100
# read the default setting file, if it exists
[ -e /etc/default/cryptobox ] && . /etc/default/cryptobox
# set CONF_FILE to default value, if not configured in /etc/default/cryptobox
CONF_FILE=${CONF_FILE:-/etc/cryptobox/cryptobox.conf}
# parse config file
. "$CONF_FILE"
############ some useful functions ###############
# check if the given device is part of the SCAN_DEVICE list
# every entry in SCAN_DEVICES is matched as "^/dev/${SCAN_DEVICE}[0-9]*$" against
# the given device
# other devices may not be touched
function is_device_allowed()
# parameter: device
{
for a in $SCAN_DEVICES
do [[ "$1" =~ "^/dev/${a}[0-9]*$" ]] && return 0
done
return 1
}
function get_device_name()
# return the uuid of the device
# if there is no uuid, then the device name is "flattened" and returned
# ignore volume-id as it may be non-unique
{
local UUID=
# check for luksUUID or ext2/3-uuid
if is_luks_device "$1"
then UUID=$("$CRYPTSETUP" luksUUID "$1")
else [ -n "$(which dumpe2fs)" ] && UUID=$(dumpe2fs -h "$1" 2>/dev/null | grep "UUID" | cut -d ":" -f 2 | sed "s/ *//g")
fi
# if there is no valid UUUD, then take the flattened device name
is_uuid_valid "$UUID" || UUID=${1//\//_}
echo "$UUID"
}
function is_uuid_valid()
# every devmapper name should look like a UUID
{
local hex=[0-9a-f]
[[ "$1" =~ "^$hex\{8\}-$hex\{4\}-$hex\{4\}-$hex\{4\}-$hex\{12\}$" ]]
}
function error_msg()
# parameter ExitCode ErrorMessage
{
echo "CBOX-ERROR: [$(basename $0) - $ACTION] - $2" >&2
exit $1
}
function partition_device()
# parameter: device sfdisk_layout_setup
# e.g.: /dev/hda "0,1,L \n,,L\n"
{
# TODO: allow different layouts
# TODO: skip config partition if a configuration is already active
# sfdisk -n doesn't actually write (for testing purpose)
if echo -e "$2" | "$SFDISK" -n "$1"
then echo -e "$2" | "$SFDISK" "$1" || return 1
else return 2
fi
true
}
function is_luks_device()
# parameter: device
{
"$CRYPTSETUP" isLuks "$1"
}
################ main ####################
ACTION=unknown
[ $# -gt 0 ] && ACTION=$1 && shift
case "$ACTION" in
partition_disk )
[ $# -ne 2 ] && error_msg 1 "wrong number of parameters"
is_device_allowed "$1" || \
error_msg 3 "this device ($1) is not listed in SCAN_DEVICES (see $CONF_FILE)"
partition_device "$1" "$2" || \
error_msg 2 "failed to create new partition table on device $1"
;;
mount )
# parameters: device
# returns the relative name of the mointpoint for success
[ $# -ne 1 ] && error_msg 1 "wrong number of parameters"
is_device_allowed "$1" || \
error_msg 3 "this device ($1) is not listed in SCAN_DEVICES (see $CONF_FILE)"
name=$(get_device_name "$1")
mountpoint -q "$MNT_PARENT/$name" && \
error_msg 5 "a device with the same name ($name) is already mounted"
mkdir -p "$MNT_PARENT/$name"
if is_luks_device "$1"
then "$CRYPTSETUP" luksOpen "$1" "$name" || \
error_msg 6 "could not open encrypted device $1"
if mount "$DEV_MAPPER_DIR/$name" "$MNT_PARENT/$name"
then true
else "$CRYPTSETUP" luksClose "$name" || true
error_msg 7 "wrong password for $1 supplied"
fi
else mount "$1" "$MNT_PARENT/$name" || \
error_msg 8 "invalid filesystem on device $1"
fi
# just in case, that there is no ext2/3 filesystem:
# set uid option (will fail silently for ext2/3)
mount -o remount,uid="$FILE_USER" "$MNT_PARENT/$name" 2>/dev/null || true
# adapt top-level permission to current setup - again: may fail silently
chown "$FILE_USER" "$MNT_PARENT/$name" 2>/dev/null || true
true
;;
umount )
#parameter: name (relative mountpoint)
[ $# -ne 1 ] && error_msg 1 "wrong number of parameters"
is_uuid_valid "$1" || [[ "$1" =~ "^[_a-z0-9]*$" ]] || \
error_msg 4 "invalid UUID ($1)"
mountpoint -q "$MNT_PARENT/$1" || \
error_msg 9 "the device with the UUID ($1) is not mounted"
# try to unmount - continue even on errors
umount "$MNT_PARENT/$1" || \
error_msg 0 "unmount of device $1 failed - device is busy"
# remove (if necessary) the dev mapping
[ -e "$DEV_MAPPER_DIR/$1" ] && "$CRYPTSETUP" luksClose "$1" || \
error_msg 11 "could not remove the device mapper for device $1"
# try to remove the mountpoint - a failure is not important
rmdir "$MNT_PARENT/$1" || true
# set exitcode
mountpoint -q "$MNT_PARENT/$1" && exit 1
exit 0
;;
create_crypto )
# parameter: device
# the passphrase is expected on stdin
[ $# -ne 1 ] && error_msg 1 "wrong number of parameters"
is_device_allowed "$1" || \
error_msg 3 "this device ($1) is not listed in SCAN_DEVICES (see $CONF_FILE)"
# read the passphrase from stdin
key=$(cat -)
# the iter-time is in milliseconds - keep it low for fast mounting
echo "$key" | \
"$CRYPTSETUP" --cipher "$DEFAULT_CIPHER" --iter-time 2000 luksFormat "$1" || \
error_msg 11 "failed to create the encrypted partition"
name=$(get_device_name "$1")
echo "$key" | "$CRYPTSETUP" luksOpen "$1" "$name" || \
error_msg 12 "failed to open the encrypted partition"
# silent output from mkfs.ext3
"$MKFS_DATA" -q "$DEV_MAPPER_DIR/$name" || \
error_msg 13 "failed to create the encrypted filesystem"
"$CRYPTSETUP" luksClose "$name" || \
error_msg 14 "failed to close the encrypted mapped device"
;;
get_device_name )
# parameter: device
[ $# -ne 1 ] && error_msg 1 "wrong number of parameters"
is_device_allowed "$1" || \
error_msg 3 "this device ($1) is not listed in SCAN_DEVICES (see $CONF_FILE)"
get_device_name "$1"
;;
mount_config )
# parameter: device
[ $# -ne 1 ] && error_msg 1 "wrong number of parameters"
[ "$USE_SEPERATE_CONFIG_DIR" != "1" ] && \
error_msg 19 "I am configured to work without a seperate config partition (see $CONF_FILE)"
is_device_allowed "$1" || \
error_msg 3 "this device ($1) is not listed in SCAN_DEVICES (see $CONF_FILE)"
mountpoint -q "$CONFIG_DIR" && \
error_msg 0 "the configuration partition is already mounted"
"$MKFS_CONFIG" -q "$1" || \
error_msg 20 "failed to create config partition filesystem"
;;
mount_config )
# parameter: device
[ $# -ne 1 ] && error_msg 1 "wrong number of parameters"
[ "$USE_SEPERATE_CONFIG_DIR" != "1" ] && \
error_msg 19 "I am configured to work without a seperate config partition (see $CONF_FILE)"
is_device_allowed "$1" || \
error_msg 3 "this device ($1) is not listed in SCAN_DEVICES (see $CONF_FILE)"
mountpoint -q "$CONFIG_DIR" && \
error_msg 0 "the configuration partition is already mounted"
mount "$1" "$CONFIG_DIR" || \
error_msg 16 "failed to mount configuration partition"
# chown to fix permissions - may fail for non-ext2/3 filesystems
chown -R "$WEB_USER" "$CONFIG_DIR" || true
mount -o remount,ro "$CONFIG_DIR" || \
error_msg 18 "failed to remount configuration partition"
true
;;
remount_config )
# parameter: { ro | rw }
[ $# -ne 1 ] && error_msg 1 "wrong number of parameters"
[ "$USE_SEPERATE_CONFIG_DIR" != "1" ] && \
error_msg 19 "I am configured to work without a seperate config partition (see $CONF_FILE)"
[[ "$1" =~ "^r[ow]$" ]] || error_msg 17 "only 'rw' and 'ro' are allowed"
mount -o "remount,$1" "$CONFIG_DIR" || \
error_msg 18 "failed to remount configuration partition"
true
;;
umount_config )
# no parameters
[ $# -ne 0 ] && error_msg 1 "wrong number of parameters"
[ "$USE_SEPERATE_CONFIG_DIR" != "1" ] && \
error_msg 19 "I am configured to work without a seperate config partition (see $CONF_FILE)"
mountpoint -q "$CONFIG_DIR" && umount "$CONFIG_DIR" || \
error_msg 18 "failed to unmount configuration partition"
;;
is_config_partition )
# parameter: device
# returns exitcode 0 if the device contains a configuration
[ $# -ne 1 ] && error_msg 1 "wrong number of parameters"
[ "$USE_SEPERATE_CONFIG_DIR" != "1" ] && \
error_msg 19 "I am configured to work without a seperate config partition (see $CONF_FILE)"
is_device_allowed "$1" || \
error_msg 3 "this device ($1) is not listed in SCAN_DEVICES (see $CONF_FILE)"
is_config=0
tmp_dir=/tmp/$(basename $0)-$$-mnt
mkdir -p "$tmp_dir"
# error means "no config partition"
if mount "$1" "$CONFIG_DIR"
then [ -e "$CONFIG_DIR/$CONFIG_MARKER" ] && is_config=1
umount "$CONFIG_DIR" || \
error_msg 14 "unable to unmount configation partition after probing"
fi
rmdir "$tmp_dir" || true
# return 0 if $device is a config partition
[ "$is_config" -eq 1 ] && exit 0
exit 1
;;
is_crypto_partition )
# parameter: device
# returns exitcode 0 if the device contains a luks header
[ $# -ne 1 ] && error_msg 1 "wrong number of parameters"
is_device_allowed "$1" || \
error_msg 3 "this device ($1) is not listed in SCAN_DEVICES (see $CONF_FILE)"
is_luks_device "$1"
;;
is_data_partition )
# parameter: device
# returns exitcode 0 if the device contains a readable filesystem
[ $# -ne 1 ] && error_msg 1 "wrong number of parameters"
is_device_allowed "$1" || \
error_msg 3 "this device ($1) is not listed in SCAN_DEVICES (see $CONF_FILE)"
status=0
tmp_dir=/tmp/$(basename $0)-$$-mnt
mkdir -p "$tmp_dir"
if mount "$1" "$tmp_dir"
then [ ! -e "$tmp_dir/$CONFIG_MARKER" ] && status=1
umount "$tmp_dir"
fi
rmdir "$tmp_dir" || true
[ "$status" -eq 1 ] && exit 0
exit 1
;;
trash_device )
# parameter: device
[ $# -ne 1 ] && error_msg 1 "wrong number of parameters"
is_device_allowed "$1" || \
error_msg 3 "this device ($1) is not listed in SCAN_DEVICES (see $CONF_FILE)"
dd if=/dev/urandom of="$1" bs=512 count=1 2>/dev/null
;;
diskinfo )
# parameter: device
[ $# -ne 1 ] && error_msg 1 "wrong number of parameters"
is_device_allowed "$1" || \
error_msg 3 "this device ($1) is not listed in SCAN_DEVICES (see $CONF_FILE)"
"$SFDISK" -L -q -l "$1"
;;
update_network )
# parameter: none
ip=
# TODO: can we avoid to hard-code the filename ($CONFIG_DIR/ip) here?
[ -e "$CONFIG_DIR/ip" ] && ip=$(<"$CONFIG_DIR/ip")
[ -n "$z" ] && ifconfig "$NET_IFACE" "$ip"
;;
* )
echo "Syntax: $(basename $0) ACTION PARAMETERS"
echo ' partition_disk $device $disk_layout'
echo ' get_device_name $device'
echo ' create_crypto $device'
echo ' mount $device'
echo ' umount $name'
echo ' create_config $device'
echo ' mount_config $device'
echo ' remount_config { ro | rw }'
echo ' umount_config'
echo ' is_config_partition $device'
echo ' is_plaindata_partition $device'
echo ' is_crypto_partition $device'
echo ' trash_device $device'
echo ' diskinfo $device'
echo ' update_network'
echo ' help'
echo
[ "$ACTION" == "help" ] && exit 0
# return error for any unknown/unspecified action
exit 1
;;
esac

View File

@ -1,92 +0,0 @@
#!/bin/sh
#
# Copyright (c) 02005 sense.lab <senselab@systemausfall.org>
#
# License: This script is distributed under the terms of version 2
# of the GNU GPL. See the LICENSE file included with the package.
#
# $Id$
#
# a simple script to check, if there was no smb traffic for the specified
# number of minutes - then it unmounts the crypto partition
#
# you may want to adjust the function "filter_ipt_rules" according to
# your setup
#
# any Parameter are ignored
#
# this script has to run as root - as it invokes iptables
#
# the iptables rules to detect smb traffic could look like the following:
# iptables -A INPUT -i eth0 -p udp --dport 138 -j ACCEPT
# iptables -A INPUT -i eth0 -p tcp --dport 139 -j ACCEPT
#
# called by:
# - cron (/etc/cron.d/cryptobox)
#
set -eu
# read the default setting file, if it exists
[ -e /etc/default/cryptobox ] && . /etc/default/cryptobox
# set CONF_FILE to default value, if not configured in /etc/default/cryptobox
CONF_FILE=${CONF_FILE:-/etc/cryptobox/cryptobox.conf}
# parse config file
. "$CONF_FILE"
############# some functions ##################
filter_ipt_rules()
# get the input rules for smb datagram traffic
{
"$IPTABLES" -L INPUT -vnx | grep -E "udp dpt:138|tcp dpt:139"
}
function check_for_traffic()
{
local traffic_yes=0
# fallback if no rules were found
# extract the number of packets and calculate the sum
filter_ipt_rules | sed 's/ */ /g' | cut -d " " -f 3 | while read a
do [ "$a" -gt 0 ] && echo "$a"
done | grep -q "" && traffic_yes=1
"$IPTABLES" -Z INPUT
[ "$traffic_yes" = "1" ]
}
################### main ######################
# TODO: migrate to multi-container-setup
exit 0
# break, if crypto partition is not mounted
"$CB_SCRIPT" is_crypto_mounted || exit 0
# break, if idle timer is turned off
MAX_IDLE_COUNTER=$("$CB_SCRIPT" get_config timeout)
[ "$MAX_IDLE_COUNTER" -eq 0 ] && exit 0
# config test
[ -z "$(filter_ipt_rules)" ] && echo "[`basename $0`]: Could not find a matching iptables rule!" >>"$LOG_FILE" && exit 1
# read current idle counter
if [ -e "$IDLE_COUNTER_FILE" ]
then current_count=$(<$IDLE_COUNTER_FILE)
else current_count=0
fi
# update counter
if check_for_traffic
then echo 0
else echo $((current_count + 1))
fi >"$IDLE_COUNTER_FILE"
# unmount crypto partition, if the threshold was reached
if [ "$(<$IDLE_COUNTER_FILE)" -ge "$MAX_IDLE_COUNTER" ]
then "$CB_SCRIPT" crypto-down >>"$LOG_FILE" 2>&1
echo "0" >"$IDLE_COUNTER_FILE"
fi

View File

@ -1,55 +0,0 @@
#!/bin/sh
#
# Copyright (c) 02005 sense.lab <senselab@systemausfall.org>
#
# License: This script is distributed under the terms of version 2
# of the GNU GPL. See the LICENSE file included with the package.
#
# $Id$
#
# FOR DEVELOPMENT ONLY!
#
# this script is used to prepare a chroot session for testing or configuring
#
# called by:
# - cbox-build.sh
#
# parameter: [commandline]
#
# if "commandline" is empty, "bash" will be used
#
set -eu
MNT_SRC=/opt/dfsruntime/runtimerd
MNT_DST=/opt/dfsruntime/runtimemnt
# the directory /tmp/ can not be used, as it is still a broken link, too
TMP_DIR="/tmp-`basename $0`-$$"
cp -a "$MNT_SRC/." "$TMP_DIR"
mount -n --bind "$TMP_DIR" "$MNT_DST"
[ ! -e /dev/null ] && mknod "/dev/null" c 1 3 && chmod 666 "/dev/null"
[ ! -e /dev/urandom ] && mknod "/dev/urandom" c 1 9 && chmod 444 "/dev/urandom"
[ ! -e /dev/console ] && mknod "/dev/console" c 1 5 && chmod 660 "/dev/console"
# remember, if proc was mounted before (e.g. because of a running chroot)
PROC_WAS_MOUNTED=no
mount -n -t proc proc /proc 2>/dev/null || PROC_WAS_MOUNTED=yes
# default language setting - prevents dpkg error messages
export LANG=C
# set default terminal (good if you are running in a screen session)
export TERM=linux
# execute parameters as commandline
if [ $# -gt 0 ]
then "$@"
else bash
fi
umount -n "$MNT_DST"
[ "$PROC_WAS_MOUNTED" = "no" ] && umount -n proc
rm -r "$TMP_DIR"

View File

@ -1,145 +0,0 @@
#!/bin/sh
#
# Copyright (c) 02005 sense.lab <senselab@systemausfall.org>
#
# License: This script is distributed under the terms of version 2
# of the GNU GPL. See the LICENSE file included with the package.
#
# $Id$
#
# this script is part of the building process of the cryptobox
# the "normal" action is necessary for every cryptobox (development & release)
# the "secure" action is mandatory for every release CD
#
# called by:
# - cbox-build.sh after copying custom files and before creating the iso image
#
set -eu
# read the default setting file, if it exists
[ -e /etc/default/cryptobox ] && . /etc/default/cryptobox
# set CONF_FILE to default value, if not configured in /etc/default/cryptobox
CONF_FILE=${CONF_FILE:-/etc/cryptobox/cryptobox.conf}
# parse config file
. "$CONF_FILE"
RUNTIMEDIR=/opt/dfsruntime/runtimerd
TUNDEV=$RUNTIMEDIR/dev/net/tun
REMOVE_PACKAGES="strace
nvi nano vim vim-common
unzip tar zip gzip bzip2
aptitude tasksel
ssh elinks curl wget netkit-inetd telnet
exim4-daemon-light exim4-config exim4-base
ppp pppconfig pppoe pppoeconf"
# remove rc symlinks for these services
SERVICES_OFF="ssh samba setserial nviboot mountnfs ntpdate"
function configure_normal()
# the usual stuff - not optimized for security
{
##### cryptobox settings ######
sed -i '/^NO_START=.*$/NO_START=0/'
sed -i '/^SKIP_NETWORK_CONFIG=.*$/SKIP_NETWORK_CONFIG=0/'
sed -i '/^EXEC_FIREWALL_RULES=.*$/EXEC_FIREWALL_RULES=1/'
sed -i '/^USE_STUNNEL=.*$/USE_STUNNEL=1/'
########### boot up ###########
# turn off creation of "/etc/nologin" (read-only fs)
sed -i '/^DELAYLOGIN=/s/^DELAYLOGIN=.*$/DELAYLOGIN=no/' /etc/default/rcS
# turn off modifying /etc/motd (read-only fs)
sed -i '/^EDITMOTD=/s/^EDITMOTD=.*$/EDITMOTD=no/' /etc/default/rcS
######### devices ##########
# create tun device for running under qemu
if [ ! -e "$TUNDEV" ]
then mkdir -p `dirname "$TUNDEV"`
mknod "$TUNDEV" c 10 200
fi
######### thttpd ###########
# change thttpd's config from 'chroot' to 'nochroot' - otherwise no perl script will run
sed -i "s/^chroot$/nochroot/" /etc/thttpd/thttpd.conf
# change thttpd-user from www-data to root (permissions for mount, cryptsetup, ...)
sed -i "s/^user=.*/user=root/" /etc/thttpd/thttpd.conf
# the thttpd documentations says "nosymlinkcheck" instead of
# "nosymlink" - TODO: "nosymlink" breaks "/cryptobox" URL!!!
#sed -i "/symlink/d" /etc/thttpd/thttpd.conf
#echo "nosymlink" >>/etc/thttpd/thttpd.conf
########## sshd ############
if [ -e "/etc/ssh" ]; then
# allow empty passwords for ssh
# the daemon is NOT started automatically, so you have to start it
# manually in case of need - as the root pw is empty and passwd is ro, you
# have to allow empty passwords for this rare case
sed -i 's/^PermitEmptyPass.*$/PermitEmptyPasswords yes/' /etc/ssh/sshd_config
# turn off PAM for ssh, as it prevents the use of empty passwords (stange behaviour)
sed -i 's/^UsePAM.*$/UsePAM no/' /etc/ssh/sshd_config
# allow nput of password
sed -i 's/^PasswordAuthentication.*$/PasswordAuthentication yes/' /etc/ssh/sshd_config
fi
# remove symlinks for unwanted services
for a in $SERVICES_OFF; do
# echo "Turning off service $a ..."
find /etc/rc?.d/ -type l -name "[SK][0-9][0-9]$a" | while read b
do rm "$b"
done
done
return 0
}
function configure_secure()
# remove everything that could weaken security
# configure_normal should be called too!
{
# disable keyboard login
sed -i '/getty/d' /etc/inittab
# remove unnecessary packages
dpkg --force-all -P $REMOVE_PACKAGES 2>&1 | grep -v "which isn't installed." || true
# remove the development features script
[ -e "$DEV_FEATURES_SCRIPT" ] && rm -f "$DEV_FEATURES_SCRIPT"
# maybe an authorized_keys file was created - but it is not dangerous,
# as the openssh package was removed anyway
[ -d /root/.ssh ] && rm -rf /root/.ssh
############## clean up ################
# remove deb-files, that were left by dfsbuild
test -d /opt/packages && rm -r /opt/packages
# remove packages and package lists
rm -fr /var/cache/apt/
return 0
}
################ main ####################
ACTION=help
[ $# -gt 0 ] && ACTION=$1
case "$ACTION" in
normal )
configure_normal
;;
secure )
configure_secure
;;
* )
echo "Syntax: `basename $0` { normal | secure }"
echo
;;
esac

View File

@ -1,67 +0,0 @@
#!/bin/sh
#
# Copyright (c) 02005 sense.lab <senselab@systemausfall.org>
#
# License: This script is distributed under the terms of version 2
# of the GNU GPL. See the LICENSE file included with the package.
#
# $Id$
#
# set up the firewall of the cryptobox
#
# called by:
# - cbox-manage.sh during network-up
#
set -u
# read the default setting file, if it exists
[ -e /etc/default/cryptobox ] && . /etc/default/cryptobox
# set CONF_FILE to default value, if not configured in /etc/default/cryptobox
CONF_FILE=${CONF_FILE:-/etc/cryptobox/cryptobox.conf}
# parse config file
. "$CONF_FILE"
ACTION="help"
[ $# -gt 0 ] && ACTION=$1
case "$ACTION" in
start)
iptables -P INPUT DROP
iptables -P FORWARD DROP
iptables -P OUTPUT ACCEPT
OFILE=/proc/sys/net/ipv4/tcp_syncookies
[ -e "$OFILE" ] && echo 1 >"$OFILE"
iptables -F
iptables -X
iptables -Z
iptables -A INPUT -i lo -j ACCEPT
for a in $ALLOW_TCP_PORTS
do iptables -A INPUT -i $NET_IFACE -p tcp --dport $a -j ACCEPT
done
for a in $ALLOW_UDP_PORTS
do iptables -A INPUT -i $NET_IFACE -p udp --dport $a -j ACCEPT
done
iptables -A INPUT -i $NET_IFACE -p icmp -j ACCEPT
;;
stop)
iptables -P INPUT ACCEPT
iptables -P FORWARD ACCEPT
iptables -P OUTPUT ACCEPT
iptables -F
iptables -X
iptables -Z
;;
*)
echo "usage $0 start | stop"
;;
esac

View File

@ -1,47 +0,0 @@
#!/bin/sh
#
# Copyright (c) 02005 sense.lab <senselab@systemausfall.org>
#
# License: This script is distributed under the terms of version 2
# of the GNU GPL. See the LICENSE file included with the package.
#
# $Id$
#
# this script creates the stunnel certificate for https
#
# parameter: "destination file"
#
# called by:
# - cbox-manage.sh during network-up if no certificate was found on the config partition
#
set -eu
# read the default setting file, if it exists
[ -e /etc/default/cryptobox ] && . /etc/default/cryptobox
# set CONF_FILE to default value, if not configured in /etc/default/cryptobox
CONF_FILE=${CONF_FILE:-/etc/cryptobox/cryptobox.conf}
# parse config file
. "$CONF_FILE"
# vcert values are in OPENSSL_CONF_FILE
CERTFILE="$1"
TMP_FILE=/tmp/cryptobox-cert.tmp
[ ! -f "$OPENSSL_CONF_FILE" ] && echo "`basename $0`: $OPENSSL_CONF_FILE not found" && exit 2
# this command creates the certificate
# this is required, because the certbuilding asks for 5 returns
echo -ne "\n\n\n\n\n" | openssl req -new -x509 -nodes -days 3650 -config "$OPENSSL_CONF_FILE" -out "$CERTFILE" -keyout "$CERTFILE"
chmod 600 "$CERTFILE"
# next step needs a lot of randomdata
dd if=/dev/urandom of="$TMP_FILE" bs=1024 count=1024
openssl dhparam -rand "$TMP_FILE" 512 >> "$CERTFILE"
rm "$TMP_FILE"
#ln -sf ${CERTPATH}stunnel.pem ${CERTPATH}`openssl x509 -noout -hash < "${CERTPATH}stunnel.pem"`.0
## print out cert values
#openssl x509 -subject -dates -fingerprint -in stunnel.pem

View File

@ -1,6 +0,0 @@
by scp or webdav - the last one is the better choice
1) webdav
apt-get install davfs2
modprobe coda
mount -t davfs https://upload.codecoop.org/groups/cryptobox/ /mnt/ttt

View File

@ -1,5 +0,0 @@
developer requirements:
- dfsbuild
- wget
- curl
- (qemu)

View File

@ -1,26 +0,0 @@
as there is no debian-package for the perl bindings of clearsilver, you have to add it manually to the tree of the cbox-tree
1) download
- get it from: http://www.clearsilver.net/downloads
- unpack (tar xzf . ...)
2) configuration
./configure --disable-python --disable-ruby --disable-csharp --disable-apache --disable-java --disable-compression --enable-perl --enable-gettext --prefix=/tmp/clearsilver-perl
3) fix a problem in scripts/document.py
change the first line to "#!/usr/bin/env python"
4) build it
- make
- make install
5) cp to the cbox
cp -a /tmp/clearsilver-perl/local/lib/perl/5.8.7/. cryptobox.conf.d/usr/lib/perl5
rm cryptobox.conf.d/usr/lib/perl5/perllocal.pod
6) dependencies
add python-clearsilver to the box (dfsbuild.conf)

View File

@ -1,23 +0,0 @@
Hints for building and integrating a new kernel into the cryptobox:
1) get the source
download it from http://kernel.org (at least 2.6.11)
2) configure
- copy the current kernel config from the cryptobox/trunk/kernel
directory to the kernel source directory as ".config" (the .config
can also be found in the current kernel-image-cryptoboxX.Y.deb packagefile)
- make menuconfig
- make-kpkg --rootcmd fakeroot --revision=cryptoboxY.X kernel_image
(replace "Y.X" by the current cryptobox release)
3) integrating
- copy the debian kernel package (see above) and the config file to cryptobox/trunk/kernel
- change the "unpackdebs" setting in cryptobox/trunk/etc-default.d/dfs-cbox.conf
- add the new kernel package and the config file to the repository (svn add)
4) afterwork
- run "cryptobox/trunk/scripts/cbox-build.sh dfsbuild" to create a fresh base system
including the new kernel
- test the box with your new kernel
- enjoy it! :)

View File

@ -1,26 +0,0 @@
1) set current version
- README
- cbox-tree.d/usr/share/cryptobox/templates/footer.cs
- cover/cover_[en|de].[swx|pdf]
- etc/defaults.d/dfs-cbox.conf (version setting)
2) build image
- 'scripts/cbox-build.sh release'
4) release notes
- https://systemausfall.org/trac/wiki/ReleaseNotes
- update CHANGELOG
3) upload to codecoop
- type "scp $FILE $USERNAME@shell.codecoop.org:."
- upload a dummy file with the same name via upload-web-interface to codecoop
- ask Jan Kanzleiter <idfx_at_codecoop.org> to replace the dummy with the the scp-file
- upload the checksumfile created by "md5sum cryptobox_vY.X.iso >cryptobox_vY.X.iso.md5sum"
- add release notes and changelog
- upload cover_[en|de].pdf
4) release announcement
- http://codecoop.org
- http://distrowatch.com
- http://livedistro.org
- http://linuxlinks.com

View File

@ -1,7 +0,0 @@
# sample startup file for running the cryptobox in a user-mode-linux environment
#
# it does not work, as the dfsbuild-cd-image is not being recognized during boot
#
# just as a reminder ...
#
kernel/uml-kernel-2.6.12.3-cryptobox dfscd=/dev/ubd1 ubd1r=_builddir/cd1/image.iso ubd0=_builddir/cd1/image-working/opt/dfsruntime/initrd.dfs con=null con0=fd:0,fd:1

View File

@ -1,27 +0,0 @@
some useful macros:
* [[TOC]] - at the beginning of the document
* [[AutoNav]] - below [[TOC]], followed by a line with "----"
* [[AddComment]] - at the end of the page (below "----")
* [[WikiInclude($PAGENAME)]] - include another wiki page
* [[redirect(wiki:$PAGENAME)]] - redirect to another page (useful to redirect to default lang)
* [[Image(file/trunk/cbox-tree.d/var/www/cryptobox-img/screenshots/$NAME)]] - beware: you may use "wiki" or "ticket" instead of "file" - very unusual syntax
* [[FootNote(Text)]] - creates a reference to a footnote - the list of footnotes is expanded by "[[FootNote]]"
special things:
* the first level heading ("= TEXT =") is considered as the page title - only lower level headings will be a part of the table of contents
* links like "CryptoBoxUser/de" are not recogniced - use "[wiki:CryptoBoxUser/de CryptoBoxUser]" instead
* for a deeper level of items or enumerations, you have to add two(!) additional spaces in front of the symbol ("*" or "1.") - this is obviously strange ...
default page layout:
[[TOC]]
[[AutoNav]]
----
= Title =
== Heading ... ==
...
----
== Comments ==
[[AddComment]]

File diff suppressed because it is too large Load Diff

View File

@ -1,6 +0,0 @@
BEWARE: the uml kernel does not work correctly - see ../hints/starting_uml.txt for details
see hints/kernel-build.txt for details on how to build and include a new kernel
cryptsetup-luks is not yet officially available for debian
Source: http://einsteinmg.dyndns.org/debian/unstable/

View File

@ -1,59 +0,0 @@
# how to build the perl-clearsilver package:
# apt-get source clearsilver
# cat THIS_FILE | patch -p0
# cd clearsilver-*
# debian/rules binary
diff -ruN clearsilver-0.9.13.orig/debian/control clearsilver-0.9.13/debian/control
--- clearsilver-0.9.13.orig/debian/control 2005-11-30 23:09:24.000000000 +0100
+++ clearsilver-0.9.13/debian/control 2005-11-30 23:38:10.000000000 +0100
@@ -39,3 +39,13 @@
This Debian package is an empty dummy package that always depends on
a package built for Debian's default Python version.
+Package: perl-clearsilver
+Architecture: all
+Section: perl
+Priority: optional
+Depends: perl (>= 5.6)
+Description: perl bindings for clearsilver
+ Clearsilver is a fast, powerful, and language-neutral HTML template system.
+ In both static content sites and dynamic HTML applications, it
+ provides a separation between presentation code and application logic which
+ makes working with your project easier.
diff -ruN clearsilver-0.9.13.orig/debian/rules clearsilver-0.9.13/debian/rules
--- clearsilver-0.9.13.orig/debian/rules 2005-11-30 23:09:24.000000000 +0100
+++ clearsilver-0.9.13/debian/rules 2005-11-30 23:49:57.000000000 +0100
@@ -9,7 +9,7 @@
include /usr/share/cdbs/1/rules/simple-patchsys.mk
DEB_CONFIGURE_EXTRA_FLAGS := --with-python=/usr/bin/python2.3 \
- --disable-perl \
+ --with-perl=/usr/bin/perl \
--disable-ruby \
--disable-csharp \
--disable-apache \
@@ -18,6 +18,7 @@
CFLAGS += -fPIC
DEB_MAKE_INSTALL_TARGET := install DESTDIR=$(CURDIR)/debian/tmp
+DEB_SHLIBDEPS_INCLUDE_perl-clearsilver := debian/perl-clearsilver/usr/lib/perl5
DEB_SHLIBDEPS_INCLUDE_python2.3-clearsilver := debian/python2.3-clearsilver/usr/lib/python2.3/site-packages
build/python2.3-clearsilver::
@@ -27,3 +28,16 @@
binary-post-install/python2.3-clearsilver::
dh_movefiles --package=python2.3-clearsilver usr/lib/python2.3
+
+build/perl-clearsilver::
+ install -d debian/tmp/usr/lib/perl5
+ install -d debian/tmp/usr/lib/perl5/auto/ClearSilver
+ install -m644 $(DEB_BUILDDIR)/perl/ClearSilver.pm \
+ debian/tmp/usr/lib/perl5/ClearSilver.pm
+ install -m755 $(DEB_BUILDDIR)/perl/blib/arch/auto/ClearSilver/ClearSilver.so \
+ debian/tmp/usr/lib/perl5/auto/ClearSilver/ClearSilver.so
+ install -m644 $(DEB_BUILDDIR)/perl/ClearSilver.bs \
+ debian/tmp/usr/lib/perl5/auto/ClearSilver/ClearSilver.bs
+
+binary-post-install/perl-clearsilver::
+ dh_movefiles --package=perl-clearsilver usr/lib/perl5

View File

@ -1,17 +0,0 @@
every report summary will be constructed this way:
- header
- single_header
- result-ok | result-error
<the diff>
- single_footer
- single_header
- result-ok | result-error
<the diff>
- single_footer
...
- footer

View File

@ -1,12 +0,0 @@
</div><!-- end of 'validation' -->
</div><!-- end of 'words' -->
<div id="footer">
<a href="https://systemausfall.org/prj/cryptobox" title="Projekt-Seite">CryptoBox-Home</a>&nbsp;&nbsp;Die CryptoBox ist ein Projekt von <a href="https://systemausfall.org/senselab" title="systemausfall.org">sense.lab</a>
</div>
</div>
</div>
</body>
</html>

View File

@ -1,25 +0,0 @@
<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>CryptoBox</title>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<meta http-equiv="pragma" content="no-cache" />
<meta http-equiv="cache-control" content="no-cache" />
<meta http-equiv="expires" content="0" />
<link rel="stylesheet" media="screen" href="cryptobox.css" type="text/css" />
</head>
<body>
<div id="main">
<div id="head">
<h1>Die CryptoBox</h1>
<h2>und zwar richtig!</h2>
</div>
<div id="content">
<div id="words">
<div id="validation">

View File

@ -1 +0,0 @@
<p class="error">

View File

@ -1 +0,0 @@
<p class="valid">

View File

@ -1,2 +0,0 @@
</p>
</div>

View File

@ -1,5 +0,0 @@
<div class="single_case">
<h1><a href="_TESTSERIES_/_TESTNAME_.html" title="retrieved page">/_TESTNAME_</a></h1>
<h2>_TESTDESCRIPTION_</h2>

View File

@ -1 +0,0 @@
purge the box

View File

@ -1,4 +0,0 @@
url https://_HOST_IP_DEFAULT_/cryptobox
data weblang=_IFACE_LANG_
data action=do_purge
data current_admin_password=

View File

@ -1,7 +0,0 @@
Data.Config.IP=_HOST_IP_DEFAULT_
Data.Config.Language=en
Data.Config.TimeOut=30
Data.Status.Config=0
Data.Status.InitRunning=0
Data.Status.IP=_HOST_IP_DEFAULT_
Data.Status.Mounted=0

View File

@ -1 +0,0 @@
displays the warning for a non-ssl connection

View File

@ -1,2 +0,0 @@
url http://_HOST_IP_DEFAULT_/cryptobox
data weblang=_IFACE_LANG_

View File

@ -1,7 +0,0 @@
Data.Config.IP=_HOST_IP_DEFAULT_
Data.Config.Language=en
Data.Config.TimeOut=30
Data.Status.Config=0
Data.Status.InitRunning=0
Data.Status.IP=_HOST_IP_DEFAULT_
Data.Status.Mounted=0

View File

@ -1 +0,0 @@
displays thttpd's error-404-page

View File

@ -1,2 +0,0 @@
url https://_HOST_IP_DEFAULT_/croptyfox
data weblang=_IFACE_LANG_

View File

@ -1 +0,0 @@
try root directory index

View File

@ -1,2 +0,0 @@
url https://_HOST_IP_DEFAULT_
data weblang=_IFACE_LANG_

View File

@ -1,7 +0,0 @@
Data.Config.IP=_HOST_IP_DEFAULT_
Data.Config.Language=en
Data.Config.TimeOut=30
Data.Status.Config=0
Data.Status.InitRunning=0
Data.Status.IP=_HOST_IP_DEFAULT_
Data.Status.Mounted=0

View File

@ -1 +0,0 @@
display the init form

View File

@ -1,3 +0,0 @@
url https://_HOST_IP_DEFAULT_/cryptobox
data action=init_ask
data weblang=_IFACE_LANG_

View File

@ -1,7 +0,0 @@
Data.Config.IP=_HOST_IP_DEFAULT_
Data.Config.Language=en
Data.Config.TimeOut=30
Data.Status.Config=0
Data.Status.InitRunning=0
Data.Status.IP=_HOST_IP_DEFAULT_
Data.Status.Mounted=0

View File

@ -1 +0,0 @@
try initialisation with empty passwords

View File

@ -1,6 +0,0 @@
url https://_HOST_IP_DEFAULT_/cryptobox
data action=init_do
data crypto_password=
data crypto_password2=
data confirm=_CONFIRM_TEXT_
data weblang=_IFACE_LANG_

View File

@ -1,7 +0,0 @@
Data.Config.IP=_HOST_IP_DEFAULT_
Data.Config.Language=en
Data.Config.TimeOut=30
Data.Status.Config=0
Data.Status.InitRunning=0
Data.Status.IP=_HOST_IP_DEFAULT_
Data.Status.Mounted=0

View File

@ -1 +0,0 @@
try initialisation with different passwords

Some files were not shown because too many files have changed in this diff Show More