Lang {

	Name	= english

	Status	= $Id$

	Title {
		Top			= The CryptoBox
		Slogan		= Privacy for the rest of us.
		Init		= CryptoBox initialization
		Mount		= Activation of encrypted data
		Umount		= Deactivation of encrypted data
		Config		= CryptoBox configuration
		Log			= CryptoBox logfiles
		System		= System
		Status		= Status
		Volume		= Properties of
	}


	Text {
		EnterCurrentCryptoPassword	= Enter the crypto password:
		EnterNewCryptoPassword	= Enter the new crypto password:
		EnterSameCryptoPassword	= Repeat the new crypto password:
		EnterCurrentAdminPassword	= Enter the current administration password:
		EnterNewAdminPassword	= Enter the new administration password:
		EnterSameAdminPassword	= Repeat the new administration password:
		InitWarning		= During the process of initialization ALL DATA on the disk WILL BE DELETED!
		ConfirmInitHint		= To confirm that you know what you are doing, please enter exactly the following sequence:
		ConfirmInit		= Yes, delete all data!
		PartitionInfo		= Current partioning of the disk:
		IPAddress		= Network address (IP) of the CryptoBox:
		TimeOut			= Timeout for deactivation of the encrypted filesystem (in minutes):
		EmptyLog		= The logfiles of the CryptoBox are empty.
		SelectLanguage		= Language preferences:
		RedirectNote		= Click here if your browser does not support automatic redirection.
		ProjectHomePage		= Website of project
		ProjectNote		= The CryptoBox is a project of
		DoUmount		= Deactivation of the encrypted filesystem
		DoMount			= Activation of the encrypted filesystem
		Configuration	= Configuration
		CryptoIsActive	= The encrypted data is accessible.
		CryptoIsDown	= The encrypted data is protected from any access.
		ChoosePartition	= Which container do you want to enable?
		ChosenPartition	= The chosen container is
		ActivePartitions	= The following containers are enabled
		PassivePartitions	= The following containers are disabled
		ContainerName	= Container's name:
		ContainerEncryption	= Enable encryption
	}


	Button {
		DoInit		= Initialization
		SaveConfig	= Save configuration
		Update		= Refresh
		Mount		= Activate filesystem
		Umount		= Deactivate filesystem
		Config		= Configuration
		PowerOff	= Shutdown
		ReBoot		= Reboot
		Protocol	= Show logfiles
		Documentation	= Help
		Status		= Status
		System		= System
		ContainerNameSet	= Change name
		InitContainer	= Initialize container
	}


	WarningMessage {
		InitNotConfirmed {
			Title	= Confirmation failed
			Text	= The sentence has to be entered exactly as shown!
		}

		EmptyCryptoPassword {
			Title	= Invalid crypto password
			Text	= You have to enter a crypto password!
		}

		DifferentCryptoPasswords {
			Title	= Crypto passwords do not match
			Text	= Both entered passwords have to be identical to ensure this is the desired password.
		}

		DifferentAdminPasswords {
			Title	= Administration passwords do not match
			Text	= Both entered passwords have to be identical to ensure this is the desired password.
		}

		WrongAdminPassword {
			Title	= Wrong Administration password
			Text	= The entered administration password is wrong. Please try again.
		}

		MountFailed {
			Title	= Activation failed
			Text	= The encrypted filesystem could not be activated. Probably the given password was wrong. Please try again.
		}

		UmountFailed {
			Title	= Deactivation failed
			Text	= The encrypted filesystem could not be deactivated. Probably some files are still in use. Close all unclean programs (for example that widely used word processor). In case of emergency just shut down the CryptoBox!
		}

		NotInitialized {
			Title	= No configuration found
			Text	= The CryptoBox has not yet been configured.
		}

		InitNotFinished {
			Title	= Initialization not yet completed
			Text	= Initialization will be completed in a few minutes. After completed initialization this action will become available.
		}

		IsMounted {
			Title	= Already active
			Text	= The encrypted filesystem has already been activated.
		}

		NotMounted {
			Title	= Inactive
			Text	= The encrypted filesystem is currently not active.
		}

		AlreadyConfigured {
			Title	= Configuration found
			Text	= The CryptoBox has already been configured. If you initialize again, all data will be deleted!
		}

		InvalidLanguage {
			Title	= Invalid language
			Text	= The selected language is not available!
		}

		InvalidIP {
			Title	= Invalid IP address
			Text	= The selected network address is not valid!
		}

		InvalidTimeOut {
			Title	= Invalid timeout
			Text	= The selected timeout is not valid!
		}

		ConfigTimeOutFailed {
			Title	= Error during change of timeout
			Text	= The timeout value could not be changed!
		}

		ConfigLanguageFailed {
			Title	= Error during change of language preferences
			Text	= The language preferences could not be changed!
		}

		ConfigIPFailed {
			Title	= Error during change of network address
			Text	= The network address could not be changed!
		}

		IPAddressChanged {
			Title	= Change of network address
			Text	= The network address has been changed. In a few seconds you will get redirected to the new address.
		}

		NoDiskAvailableForMount {
			Title	= No partition available
			Text	= There is no unused container available. Maybe all containers are already mounted?
		}
	
		NoDiskAvailableForUmount {
			Title	= No partition available
			Text	= There is no active container available for turning off. Maybe there is no active container?
		}

		InvalidDevice {
			Title	= Invalid device
			Text	= The device you have chosen is invalid!
		}

		InvalidVolumeName {
			Title	= Changing of container's name failed
			Text	= The supplied new name of the container was invalid. Please try again!
		}

		SetVolumeNameFailed {
			Title	= Changing of container's name failed
			Text	= Could not change the name of the container. Take a look at the log files for details.
		}

		VolumeMayNotBeMounted {
			Title	= The container is mounted
			Text	= This action is not available while the container is active. Please turn it off first.
		}
	}


	SuccessMessage {
		InitRunning {
			Title	= Initialization running
			Text	= The initialization will be completed in background. You may configure it now and activate the encrypted filesystem in a few minutes.
		}

		ConfigSaved {
			Title	= Configuration saved
			Text	= The new settings have been accepted.
		}

		MountDone {
			Title	= Encrypted filesystem activated
			Text	= The encrypted filesystem is now available.
		}

		UmountDone {
			Title	= Encrypted filesystem deactivated
			Text	= The encrypted filesystem is now secured from all forms of access.
		}

		PowerOff {
			Title	= Shutdown
			Text	= The CryptoBox is currently going to halt. In a few seconds you can power it off (in case this does not happen automatically).
		}

		ReBoot {
			Title	= Reboot
			Text	= The CryptoBox is currently rebooting. In a few seconds it will be available again. Please wait - you will get redirected, when the reboot has finished.
		}
	}


	ErrorMessage {

		UnknownAction {
			Title	= Unknown action
			Text	= You have requested an undefined action.
		}

		NoSSL {
			Title	= Unencrypted connection
			Text	= The CryptoBox only accepts encrypted connections (https), so the password is safe from curious eyes. The encrypted connection will be established in a few seconds.
		}

		InitFailed {
			Title	= Initialization failed
			Text	= Please send the logfiles (see above) to the developers of the CryptoBox (cryptobox@systemausfall.org).
		}

		NoHardDisk {
			Title	= No hard disk
			Text	= No disk suitable for an encrypted filesystem found. Please ensure the BIOS detected the disk during power-on of the computer.
		}
	}

}