*built new kernel
*new "get_available_disks" feature *some backports in 0.2.1
This commit is contained in:
parent
815da956f6
commit
10c5b1082a
7 changed files with 118 additions and 131 deletions
|
|
@ -1,7 +1,7 @@
|
|||
# this file is directly sourced by some bash scripts
|
||||
# so there should be no space around the "="
|
||||
|
||||
LANGUAGE=de
|
||||
LANGUAGE=en
|
||||
NET_IFACE=eth0
|
||||
SAMBA_USER=nobody
|
||||
SCAN_DEVICES="/dev/hda /dev/hdb /dev/hdc /dev/hde /dev/hdf /dev/hdg /dev/scd0 /dev/scd1 /dev/scd2 /dev/scd3 /dev/sda /dev/sdb /dev/sdc /dev/sdd"
|
||||
|
|
@ -25,13 +25,13 @@ OPENSSL_CONF_FILE=/etc/cryptobox/openssl.cnf
|
|||
IDLE_COUNTER_FILE=/tmp/cbox-idle-counter
|
||||
|
||||
# crypto settings
|
||||
HASH=sha512
|
||||
ALGO=aes
|
||||
HASH=ripemd160
|
||||
ALGO=aes-cbc-essiv:sha256
|
||||
CRYPTMAPPER_DEV=/dev/mapper/cryptobox-data
|
||||
|
||||
# some programs
|
||||
SFDISK=/sbin/sfdisk
|
||||
WIPE=/usr/bin/wipe
|
||||
#WIPE=/usr/bin/wipe
|
||||
MKFS_DATA=/sbin/mkfs.ext3
|
||||
MKFS_CONFIG=/sbin/mkfs.ext2
|
||||
CRYPTSETUP=/sbin/cryptsetup
|
||||
|
|
|
|||
|
|
@ -7,7 +7,7 @@
|
|||
case "$1" in
|
||||
start )
|
||||
echo
|
||||
echo "Hints for usage:
|
||||
echo "Hints for usage: "
|
||||
echo " * you can not login here :)"
|
||||
echo " * point a webbrowser on another computer to 'http://$(/usr/lib/cryptobox/cb-manage.sh get_current_ip)'"
|
||||
echo " * configure your box via your webbrowser"
|
||||
|
|
|
|||
|
|
@ -1,4 +1,5 @@
|
|||
#!/bin/sh
|
||||
# $Id: cbox-manage.sh 308 2005-10-20 12:11:32Z age $
|
||||
#
|
||||
# this script does EVERYTHING
|
||||
# all other scripts are only frontends :)
|
||||
|
|
@ -44,12 +45,7 @@ function initial_checks()
|
|||
{
|
||||
local device="$1"
|
||||
[ ! -b "$device" ] && log_msg "blockdevice $device does not exist" && return 1
|
||||
[ ! -x "$WIPE" ] && log_msg "$WIPE not found" && return 1
|
||||
[ ! -x "$SFDISK" ] && log_msg "$SFDISK not found" && return 1
|
||||
for a in $ALGO $HASH
|
||||
do grep -q "^name *: $a$" /proc/crypto || modprobe "$a"
|
||||
grep -q "^name *: $a$" /proc/crypto || { log_msg "$a is not supported by kernel" && return 1; }
|
||||
done
|
||||
log_msg "inital checks successful"
|
||||
return 0
|
||||
}
|
||||
|
|
@ -84,9 +80,28 @@ function config_get_value()
|
|||
else conf_dir=$CONFIG_DEFAULTS_DIR
|
||||
fi
|
||||
[ -z "$1" ] && error_msg 1 "empty setting name"
|
||||
[ ! -e "$conf_dir/$1" ] && error_msg 2 "unknown configuration value ($1)"
|
||||
# remove trailing line break
|
||||
echo -n $(cat "$conf_dir/$1")
|
||||
# check for existence - maybe use default values (for old releases without this setting)
|
||||
if [ ! -e "$conf_dir/$1" ]
|
||||
then case "$1" in
|
||||
version )
|
||||
echo -n "0.2"
|
||||
;;
|
||||
cipher )
|
||||
echo -n "aes"
|
||||
;;
|
||||
hash )
|
||||
echo -n "sha512"
|
||||
;;
|
||||
* )
|
||||
error_msg 2 "unknown configuration value ($1)"
|
||||
# empty output
|
||||
;;
|
||||
esac
|
||||
else echo -n $(cat "$conf_dir/$1")
|
||||
# this removes the trailing line break
|
||||
fi
|
||||
# always return without error
|
||||
true
|
||||
}
|
||||
|
||||
|
||||
|
|
@ -105,7 +120,7 @@ function create_config()
|
|||
log_msg "Copying configuration defaults ..."
|
||||
cp -a "$CONFIG_DEFAULTS_DIR/." "$CONFIG_DIR"
|
||||
|
||||
log_msg "Copying temporary cerificate file to config filesystem ..."
|
||||
log_msg "Copying temporary certificate file to config filesystem ..."
|
||||
# beware: the temp file should always be there - even after reboot - see "mount_config"
|
||||
cp -p "$CERT_TEMP" "$CERT_FILE"
|
||||
|
||||
|
|
@ -135,7 +150,7 @@ function create_crypto()
|
|||
{
|
||||
local device="$1"
|
||||
# passphrase may be passed via command line
|
||||
$CRYPTSETUP -h "$HASH" -c "$ALGO" create "`basename $CRYPTMAPPER_DEV`" "${device}2"
|
||||
$CRYPTSETUP -h "$(config_get_value hash)" -c "$(config_get_value cipher)" create "`basename $CRYPTMAPPER_DEV`" "${device}2"
|
||||
}
|
||||
|
||||
|
||||
|
|
@ -210,11 +225,14 @@ function find_harddisk()
|
|||
do grep -q " `basename $a`$" /proc/partitions && echo "$a" && break
|
||||
done
|
||||
fi )
|
||||
[ -z "$dev" ] && echo "no valid partition for initialisation found!" >>"$LOG_FILE"
|
||||
if [ -z "$dev" ] ; then
|
||||
echo "no valid harddisk for initialisation found!" >>"$LOG_FILE"
|
||||
cat /proc/partitions >>"$LOG_FILE"
|
||||
return 1
|
||||
fi
|
||||
echo -n "$dev"
|
||||
}
|
||||
|
||||
|
||||
function mount_config()
|
||||
{
|
||||
is_config_mounted && error_msg 3 "configuration directory ($CONFIG_DIR) is already mounted!"
|
||||
|
|
@ -238,12 +256,12 @@ function mount_config()
|
|||
|
||||
function mount_crypto()
|
||||
{
|
||||
is_crypto_mounted && echo "Das Crypto-Dateisystem ist bereits aktiv!" && return
|
||||
is_crypto_mounted && echo "The cryptofilesystem is already active!" && return
|
||||
local device=`find_harddisk`
|
||||
[ -z "$device" ] && error_msg 4 'no valid harddisk found!'
|
||||
[ -z "$device" ] && error_msg 4 'No valid harddisk found!' && return 1
|
||||
# passphrase is read from stdin
|
||||
log_msg "Mounting crypto partition ..."
|
||||
$CRYPTSETUP -h "$HASH" -c "$ALGO" create "`basename $CRYPTMAPPER_DEV`" "${device}2"
|
||||
$CRYPTSETUP -h "$(config_get_value hash)" -c "$(config_get_value cipher)" create "`basename $CRYPTMAPPER_DEV`" "${device}2"
|
||||
if mount "$CRYPTMAPPER_DEV" "$CRYPTO_DIR"
|
||||
then log_msg "Mount succeded - now starting samba ..."
|
||||
/etc/init.d/samba start
|
||||
|
|
@ -282,12 +300,12 @@ function init_cryptobox_part1()
|
|||
# this is only the first part of initialisation that takes no time - good for a smooth web interface
|
||||
{
|
||||
local device=$(find_harddisk)
|
||||
[ -z "$device" ] && log_msg 'no valid harddisk found!' && return 1
|
||||
[ -z "$device" ] && log_msg 'No valid harddisk found!' && return 1
|
||||
(
|
||||
log_msg "Initializing crypto partition on $device ..."
|
||||
umount_crypto || true
|
||||
mount | grep -q " $CONFIG_DIR " && umount "$CONFIG_DIR" || true
|
||||
initial_checks "$device" || return 1
|
||||
initial_checks "$device" || { log_msg "initial checks failed" && return 1}
|
||||
create_partitions "$device"
|
||||
create_config "$device"
|
||||
) >>"$LOG_FILE" 2>&1
|
||||
|
|
|
|||
|
|
@ -173,7 +173,7 @@ deletefiles = /etc/rcS.d/*discover
|
|||
|
||||
# Debs from local fs to unpack on live FS (will not be configured)
|
||||
#unpackdebs = kernel/kernel-image-2.6.8_1.dfs_i386.deb
|
||||
unpackdebs = kernel/kernel-image-2.6.12.6_cryptobox0.3_i386.deb
|
||||
unpackdebs = kernel/kernel-image-2.6.12.6_cryptobox0.2.1_i386.deb
|
||||
|
||||
# Other packages to install besides the list in DEFAULT
|
||||
packages = %(allpackages)s
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
#
|
||||
# Automatically generated make config: don't edit
|
||||
# Linux kernel version: 2.6.12.6
|
||||
# Mon Oct 17 13:43:42 2005
|
||||
# Thu Oct 20 16:59:34 2005
|
||||
#
|
||||
CONFIG_X86=y
|
||||
CONFIG_MMU=y
|
||||
|
|
@ -357,18 +357,18 @@ CONFIG_IDEDMA_AUTO=y
|
|||
#
|
||||
# SCSI device support
|
||||
#
|
||||
CONFIG_SCSI=m
|
||||
CONFIG_SCSI=y
|
||||
# CONFIG_SCSI_PROC_FS is not set
|
||||
|
||||
#
|
||||
# SCSI support type (disk, tape, CD-ROM)
|
||||
#
|
||||
CONFIG_BLK_DEV_SD=m
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
# CONFIG_CHR_DEV_ST is not set
|
||||
# CONFIG_CHR_DEV_OSST is not set
|
||||
CONFIG_BLK_DEV_SR=m
|
||||
CONFIG_BLK_DEV_SR=y
|
||||
# CONFIG_BLK_DEV_SR_VENDOR is not set
|
||||
CONFIG_CHR_DEV_SG=m
|
||||
CONFIG_CHR_DEV_SG=y
|
||||
|
||||
#
|
||||
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
|
||||
|
|
@ -387,87 +387,56 @@ CONFIG_SCSI_FC_ATTRS=m
|
|||
#
|
||||
# SCSI low-level drivers
|
||||
#
|
||||
CONFIG_BLK_DEV_3W_XXXX_RAID=m
|
||||
CONFIG_SCSI_3W_9XXX=m
|
||||
CONFIG_SCSI_7000FASST=m
|
||||
CONFIG_SCSI_ACARD=m
|
||||
CONFIG_SCSI_AHA152X=m
|
||||
CONFIG_SCSI_AHA1542=m
|
||||
CONFIG_SCSI_AACRAID=m
|
||||
CONFIG_SCSI_AIC7XXX=m
|
||||
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
|
||||
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
|
||||
# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set
|
||||
CONFIG_AIC7XXX_DEBUG_ENABLE=y
|
||||
CONFIG_AIC7XXX_DEBUG_MASK=0
|
||||
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
|
||||
CONFIG_SCSI_AIC7XXX_OLD=m
|
||||
CONFIG_SCSI_AIC79XX=m
|
||||
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
|
||||
CONFIG_AIC79XX_RESET_DELAY_MS=15000
|
||||
# CONFIG_AIC79XX_BUILD_FIRMWARE is not set
|
||||
# CONFIG_AIC79XX_ENABLE_RD_STRM is not set
|
||||
CONFIG_AIC79XX_DEBUG_ENABLE=y
|
||||
CONFIG_AIC79XX_DEBUG_MASK=0
|
||||
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
|
||||
CONFIG_SCSI_DPT_I2O=m
|
||||
CONFIG_SCSI_IN2000=m
|
||||
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
|
||||
# CONFIG_SCSI_3W_9XXX is not set
|
||||
# CONFIG_SCSI_7000FASST is not set
|
||||
# CONFIG_SCSI_ACARD is not set
|
||||
# CONFIG_SCSI_AHA152X is not set
|
||||
# CONFIG_SCSI_AHA1542 is not set
|
||||
# CONFIG_SCSI_AACRAID is not set
|
||||
# CONFIG_SCSI_AIC7XXX is not set
|
||||
# CONFIG_SCSI_AIC7XXX_OLD is not set
|
||||
# CONFIG_SCSI_AIC79XX is not set
|
||||
# CONFIG_SCSI_DPT_I2O is not set
|
||||
# CONFIG_SCSI_IN2000 is not set
|
||||
# CONFIG_MEGARAID_NEWGEN is not set
|
||||
CONFIG_MEGARAID_LEGACY=m
|
||||
# CONFIG_MEGARAID_LEGACY is not set
|
||||
# CONFIG_SCSI_SATA is not set
|
||||
CONFIG_SCSI_BUSLOGIC=m
|
||||
# CONFIG_SCSI_OMIT_FLASHPOINT is not set
|
||||
CONFIG_SCSI_DMX3191D=m
|
||||
CONFIG_SCSI_DTC3280=m
|
||||
CONFIG_SCSI_EATA=m
|
||||
# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
|
||||
# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
|
||||
CONFIG_SCSI_EATA_MAX_TAGS=16
|
||||
CONFIG_SCSI_FUTURE_DOMAIN=m
|
||||
CONFIG_SCSI_GDTH=m
|
||||
CONFIG_SCSI_GENERIC_NCR5380=m
|
||||
CONFIG_SCSI_GENERIC_NCR5380_MMIO=m
|
||||
# CONFIG_SCSI_GENERIC_NCR53C400 is not set
|
||||
CONFIG_SCSI_IPS=m
|
||||
CONFIG_SCSI_INITIO=m
|
||||
CONFIG_SCSI_INIA100=m
|
||||
CONFIG_SCSI_PPA=m
|
||||
CONFIG_SCSI_IMM=m
|
||||
# CONFIG_SCSI_IZIP_EPP16 is not set
|
||||
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
|
||||
CONFIG_SCSI_NCR53C406A=m
|
||||
CONFIG_SCSI_SYM53C8XX_2=m
|
||||
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
|
||||
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
|
||||
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
|
||||
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
|
||||
CONFIG_SCSI_IPR=m
|
||||
# CONFIG_SCSI_IPR_TRACE is not set
|
||||
# CONFIG_SCSI_IPR_DUMP is not set
|
||||
CONFIG_SCSI_PAS16=m
|
||||
CONFIG_SCSI_PSI240I=m
|
||||
CONFIG_SCSI_QLOGIC_FAS=m
|
||||
CONFIG_SCSI_QLOGIC_FC=m
|
||||
# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set
|
||||
CONFIG_SCSI_QLOGIC_1280=m
|
||||
# CONFIG_SCSI_QLOGIC_1280_1040 is not set
|
||||
CONFIG_SCSI_QLA2XXX=m
|
||||
CONFIG_SCSI_QLA21XX=m
|
||||
CONFIG_SCSI_QLA22XX=m
|
||||
CONFIG_SCSI_QLA2300=m
|
||||
CONFIG_SCSI_QLA2322=m
|
||||
CONFIG_SCSI_QLA6312=m
|
||||
CONFIG_SCSI_LPFC=m
|
||||
CONFIG_SCSI_SYM53C416=m
|
||||
CONFIG_SCSI_DC395x=m
|
||||
CONFIG_SCSI_DC390T=m
|
||||
CONFIG_SCSI_T128=m
|
||||
CONFIG_SCSI_U14_34F=m
|
||||
# CONFIG_SCSI_U14_34F_TAGGED_QUEUE is not set
|
||||
# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set
|
||||
CONFIG_SCSI_U14_34F_MAX_TAGS=8
|
||||
CONFIG_SCSI_ULTRASTOR=m
|
||||
CONFIG_SCSI_NSP32=m
|
||||
# CONFIG_SCSI_BUSLOGIC is not set
|
||||
# CONFIG_SCSI_DMX3191D is not set
|
||||
# CONFIG_SCSI_DTC3280 is not set
|
||||
# CONFIG_SCSI_EATA is not set
|
||||
# CONFIG_SCSI_FUTURE_DOMAIN is not set
|
||||
# CONFIG_SCSI_GDTH is not set
|
||||
# CONFIG_SCSI_GENERIC_NCR5380 is not set
|
||||
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
|
||||
# CONFIG_SCSI_IPS is not set
|
||||
# CONFIG_SCSI_INITIO is not set
|
||||
# CONFIG_SCSI_INIA100 is not set
|
||||
# CONFIG_SCSI_PPA is not set
|
||||
# CONFIG_SCSI_IMM is not set
|
||||
# CONFIG_SCSI_NCR53C406A is not set
|
||||
# CONFIG_SCSI_SYM53C8XX_2 is not set
|
||||
# CONFIG_SCSI_IPR is not set
|
||||
# CONFIG_SCSI_PAS16 is not set
|
||||
# CONFIG_SCSI_PSI240I is not set
|
||||
# CONFIG_SCSI_QLOGIC_FAS is not set
|
||||
# CONFIG_SCSI_QLOGIC_FC is not set
|
||||
# CONFIG_SCSI_QLOGIC_1280 is not set
|
||||
CONFIG_SCSI_QLA2XXX=y
|
||||
# CONFIG_SCSI_QLA21XX is not set
|
||||
# CONFIG_SCSI_QLA22XX is not set
|
||||
# CONFIG_SCSI_QLA2300 is not set
|
||||
# CONFIG_SCSI_QLA2322 is not set
|
||||
# CONFIG_SCSI_QLA6312 is not set
|
||||
# CONFIG_SCSI_LPFC is not set
|
||||
# CONFIG_SCSI_SYM53C416 is not set
|
||||
# CONFIG_SCSI_DC395x is not set
|
||||
# CONFIG_SCSI_DC390T is not set
|
||||
# CONFIG_SCSI_T128 is not set
|
||||
# CONFIG_SCSI_U14_34F is not set
|
||||
# CONFIG_SCSI_ULTRASTOR is not set
|
||||
# CONFIG_SCSI_NSP32 is not set
|
||||
# CONFIG_SCSI_DEBUG is not set
|
||||
|
||||
#
|
||||
|
|
@ -511,17 +480,17 @@ CONFIG_IEEE1394=y
|
|||
#
|
||||
# Texas Instruments PCILynx requires I2C
|
||||
#
|
||||
CONFIG_IEEE1394_OHCI1394=m
|
||||
CONFIG_IEEE1394_OHCI1394=y
|
||||
|
||||
#
|
||||
# Protocol Drivers
|
||||
#
|
||||
# CONFIG_IEEE1394_VIDEO1394 is not set
|
||||
CONFIG_IEEE1394_SBP2=m
|
||||
CONFIG_IEEE1394_SBP2=y
|
||||
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
|
||||
# CONFIG_IEEE1394_ETH1394 is not set
|
||||
# CONFIG_IEEE1394_DV1394 is not set
|
||||
# CONFIG_IEEE1394_RAWIO is not set
|
||||
CONFIG_IEEE1394_RAWIO=y
|
||||
# CONFIG_IEEE1394_CMP is not set
|
||||
|
||||
#
|
||||
|
|
@ -953,7 +922,7 @@ CONFIG_DUMMY_CONSOLE=y
|
|||
#
|
||||
CONFIG_USB_ARCH_HAS_HCD=y
|
||||
CONFIG_USB_ARCH_HAS_OHCI=y
|
||||
CONFIG_USB=m
|
||||
CONFIG_USB=y
|
||||
# CONFIG_USB_DEBUG is not set
|
||||
|
||||
#
|
||||
|
|
@ -968,13 +937,13 @@ CONFIG_USB_DEVICEFS=y
|
|||
#
|
||||
# USB Host Controller Drivers
|
||||
#
|
||||
CONFIG_USB_EHCI_HCD=m
|
||||
CONFIG_USB_EHCI_HCD=y
|
||||
# CONFIG_USB_EHCI_SPLIT_ISO is not set
|
||||
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
|
||||
CONFIG_USB_OHCI_HCD=m
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
|
||||
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
|
||||
CONFIG_USB_UHCI_HCD=m
|
||||
CONFIG_USB_UHCI_HCD=y
|
||||
# CONFIG_USB_SL811_HCD is not set
|
||||
|
||||
#
|
||||
|
|
@ -987,7 +956,7 @@ CONFIG_USB_UHCI_HCD=m
|
|||
#
|
||||
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
|
||||
#
|
||||
CONFIG_USB_STORAGE=m
|
||||
CONFIG_USB_STORAGE=y
|
||||
# CONFIG_USB_STORAGE_DEBUG is not set
|
||||
# CONFIG_USB_STORAGE_DATAFAB is not set
|
||||
CONFIG_USB_STORAGE_FREECOM=y
|
||||
|
|
@ -1190,10 +1159,10 @@ CONFIG_MSDOS_PARTITION=y
|
|||
#
|
||||
CONFIG_NLS=y
|
||||
CONFIG_NLS_DEFAULT="iso8859-15"
|
||||
CONFIG_NLS_CODEPAGE_437=m
|
||||
CONFIG_NLS_CODEPAGE_437=y
|
||||
# CONFIG_NLS_CODEPAGE_737 is not set
|
||||
# CONFIG_NLS_CODEPAGE_775 is not set
|
||||
CONFIG_NLS_CODEPAGE_850=m
|
||||
CONFIG_NLS_CODEPAGE_850=y
|
||||
# CONFIG_NLS_CODEPAGE_852 is not set
|
||||
# CONFIG_NLS_CODEPAGE_855 is not set
|
||||
# CONFIG_NLS_CODEPAGE_857 is not set
|
||||
|
|
@ -1213,21 +1182,21 @@ CONFIG_NLS_CODEPAGE_850=m
|
|||
# CONFIG_NLS_ISO8859_8 is not set
|
||||
# CONFIG_NLS_CODEPAGE_1250 is not set
|
||||
# CONFIG_NLS_CODEPAGE_1251 is not set
|
||||
CONFIG_NLS_ASCII=m
|
||||
CONFIG_NLS_ISO8859_1=m
|
||||
# CONFIG_NLS_ISO8859_2 is not set
|
||||
# CONFIG_NLS_ISO8859_3 is not set
|
||||
# CONFIG_NLS_ISO8859_4 is not set
|
||||
# CONFIG_NLS_ISO8859_5 is not set
|
||||
# CONFIG_NLS_ISO8859_6 is not set
|
||||
# CONFIG_NLS_ISO8859_7 is not set
|
||||
# CONFIG_NLS_ISO8859_9 is not set
|
||||
# CONFIG_NLS_ISO8859_13 is not set
|
||||
# CONFIG_NLS_ISO8859_14 is not set
|
||||
CONFIG_NLS_ASCII=y
|
||||
CONFIG_NLS_ISO8859_1=y
|
||||
CONFIG_NLS_ISO8859_2=y
|
||||
CONFIG_NLS_ISO8859_3=y
|
||||
CONFIG_NLS_ISO8859_4=y
|
||||
CONFIG_NLS_ISO8859_5=y
|
||||
CONFIG_NLS_ISO8859_6=y
|
||||
CONFIG_NLS_ISO8859_7=y
|
||||
CONFIG_NLS_ISO8859_9=y
|
||||
CONFIG_NLS_ISO8859_13=y
|
||||
CONFIG_NLS_ISO8859_14=y
|
||||
CONFIG_NLS_ISO8859_15=y
|
||||
# CONFIG_NLS_KOI8_R is not set
|
||||
# CONFIG_NLS_KOI8_U is not set
|
||||
CONFIG_NLS_UTF8=m
|
||||
CONFIG_NLS_KOI8_R=y
|
||||
CONFIG_NLS_KOI8_U=y
|
||||
# CONFIG_NLS_UTF8 is not set
|
||||
|
||||
#
|
||||
# Profiling support
|
||||
BIN
v0.2.1/kernel/kernel-image-2.6.12.6_cryptobox0.2.1_i386.deb
Normal file
BIN
v0.2.1/kernel/kernel-image-2.6.12.6_cryptobox0.2.1_i386.deb
Normal file
Binary file not shown.
Binary file not shown.
Loading…
Reference in a new issue